Metric Range 0-2mm Magnetic Z Axis Tool Dial Zero Pre Setter Gage Offset CNC electronic Z-axis Zero-Pre-setter Tool

Magnetic Z Axis Tool Dial Zero Pre Setter  Gage Offset CNC Metric Range

Features: - Measurement surface is large, easy to operate - Mechanical zero-setting instrument for CNC Machine Centers - Fast and sure establishing of "0" reference point with built in indicator - No average of several spindle approaches is required, as is the case with most electronic edge finders - Positive alignment of zero position with easy reading precision indicator - Spring loaded setting face to safeguard against damage from overrun - Positing accuracy and repeatability Specification:

METRIC SIZE: 0-2mm x 0.01mm - Color: sh by - Graduation: 0.1mm/ .001"

different design, sh by !!!

REMARK: plastic or mental box , send by ly !!

Features: 1. Large screen LCD display, clear and easy to read 2.Mm/in on; in the power-on state, tap this on to convert the metric inch unit 3.ON/OFF/ZERO: Short pre this on to start and zero setting; long pre for 3 seconds to shut down. 4. Powered by a 1.5v on battery 5. Body height 50mm 6. Range 5mm 7. Reading resolution: 0.01mm/0.0005” 8. Repeatability: 0.01mm/0.0005” Package included: 1 * Z Axis Tool Dial Zero Pre-Setter Gage 1 * Storage Box remark: goods color sh by ------------------ Instructions: 1. Before using, pre the cutter shaft a few times to check whether the slide is smooth. 2. We the bottom of the tool setting tool with the clean and soft cotton cloth and the zero base surface. 3. We the workbench or workpiece that needs to be determined to the distance of the tool t. 4. Place the tool setting tool upside down on the workbench or flat surface, and pre down gently to ensure that the zero setting base surface and the work table or plane are completely fitted. Pre the ON/OFF/ZERO key to set the zero position. . 5. After the zero position is set, set the tool setting tool on the table or workpiece plane directly below the machine tool t, move the tool t slowly down, touch the surface of the tool axis, and continue to slowly adjust downward until the LCD The degree on the display is 0.00mm. At this time, the distance from the t to the table or the plane of the workpiece is 50 mm + / 0.01 mm. Zero the Z axis on the device at this time, then move the Z axis of the device to a safe distance, take the tool to the tool, and then move the Z axis down to the previously set zero position. At this time, the tool t reaches the workbench. Or the distance of the workpiece plane is 50 +/- 0.01 mm. According to the actual needs, adjust the distance from the tool t to the work surface or the workpiece plane to complete the tool setting.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.