MCU Tools Waveshare Core405R, STM32F4 Core Board

GH₵ 999.00

GH₵ 1,427.0030%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 69.93 to Tema

0 out of 5

(No ratings available)

Promotions

Enjoy cheaper delivery fees when you select a pickup station at checkout Free Delivery in Accra and Kumasi for Orders above GHC120. Pick-up stations only! (Excluding Large)

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees GH₵ 86.59

Ready for pickup between 13 January and 16 January if you place your order within the next 21hrs 51mins

Door Delivery

Delivery Fees GH₵ 98.49

Ready for delivery between 13 January and 16 January if you place your order within the next 21hrs 51mins

Postal Shipping

Delivery Fees GH₵ 69.93

Ready for delivery between 30 January and 13 February if you place your order within the next 21hrs 51mins

Return Policy

Free return within 15 days for all eligible items.Details

Seller Information

xuanning

80%Seller Score

7 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Poor

Product details

MCU Tools Waveshare Core405R, STM32F4 Core Board
Overview
1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.
2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.
3. All the I/O ports are accessible on the pin headers
4. JTAG/SWD programming/debugging interface
5. 2.54mm header pitch, allowed to be plugged-in your application board
What has On Board
1. STM32F405RGT6: The high performance STM32 MCU which features:
- Core: Cortex-M4 32-bit RISC
- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP64
- Memories: 1MB Flash, 192+4kB SRAM
- MCU communication Interfaces:
-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN
--1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY
--1 x USB HS ULPI (external PHY required)
- AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. AMS1117-3.3: 3.3V voltage regulator
3. MIC2075-2: onboard USB power management device
4. Power supply switch, powered from 5Vin or USB connection
5. Boot mode selection, for configuring BOOT0 pin
6. Power indicator
7. VBUS LED
8. Reset button
9. 8M crystal
10. 32.768K crystal, for internal RTC with calibration
11. JTAG/SWD interface: for debugging/programming
12. USB connector, used for establishing USB communication between PC and the STM32 development board
13. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
15. USB jumper
- Short the jumper when using USB
- Open the jumper to disconnect from related I/O port
16. VBAT selection jumper
- Sho