Manual Sewing Machine Mini Portable Sewing Machine

Product categories: household sewing machines

This machine has three colors:  blue 

Size: 10 * 9 * 3.5cm

The instructions are printed on the machine box!

You don't have to to spend a large sum of money to go out to buy a heavy household sewing machine,Now, we will provide you with a simple convenient and easy to operate the new manual sewing machine, easy to carry, the manual machine sewing machine fully competent for all kinds of sewing requirement.

Package Includes: 1 * mini manual sewing machine

Product Description: A new type of manual sewing machine that is simple, convenient and easy to operate. Easy to carry. The sewing machine is assembled from metal and alloy plastic and comes with a complete set of accessories. It can be used immediately after purchase, can be used for ordinary sewing, or you can sew some patterns you like.

How to use: 1. Stand by the right hand with four fingers to support the base, and the thumb is placed on the top of the cover. Hold the machine steadily;

2. Thread the cable on the bobbin gently. Then pass through the lead coil. The lead thread is temporarily placed next to the needle, and the threader is passed from the front of the needle (to the fuselage joint) through the needle hole, and then the thread is introduced into the needle hole, and the needle puller is pulled out. About 2-3 cm of crimping plate can be used for waiting;

3. Place the cloth: Raise the pressure plate with the right index finger, and place the fabric to be sewn (thickness not exceeding 0.8mm) into the pressure plate, gently put it back into the pressure plate to press the fabric;

4. Sewing operation: Hold the fabric with the left hand, gently press the top of the upper hand gently and press the top of the top cover to the bottom, press the thumb down again, then press it again. Then, the feeding mechanism automatically sends the seam to the left. , hold your right hand and gradually move to the right. Gently move the seam to the left with the left hand cloth and the sewing rhythm until the end of sewing; cut the thread with scissors and gently pull out the fabric under the platen. From the reverse side of the quilted fabric, pull out the last section of the thread so that it is threaded into the next side of the loop and tie it. The stitches are firm. Do not pull the thread ends with a hard-drawn fabric at the end of the left hand to avoid pulling the needles and pins.

5. This machine can automatically feed and adjust the tightness between the stitches, but it is necessary to pay attention to the following points: the stitches are too tight, adjust the pressure nut slightly counterclockwise; the stitches are too loose, adjust the pressure nut slightly clockwise; The correct stitching is tight. If the stitches are larger, the left hand pulls the cloth faster. If the stitches are tighter, the left hand pull cloth can be slightly slower;

6. Change line group: If you use a large wire group, you can connect the spare extension rod to the spool shaft, insert the large wire group, place the spare plastic shaft at the end of the rod to fix the large wire group, and then thread the thread. Sewing after adjusting the tension of the thread; using cotton or synthetic thread works well;

7. Change needle: Loosen the fixing screw, take out the broken needle, and install a new needle as shown. Be careful to place the needle flat against the positive set screw.