Low Frequency 50HZ Inverter Drive Core Board Inverter Accessories Stablized Power Supply

New Low Frequency 50HZ Inverter Drive Core Board Inverter Acceories Stablized Power Supply

Dimensions: 65*80*35mm

Input voltage: DC12V (8-15V)

This board has no voltage regulation function

Output voltage: The wiring method of the 220-to-12V+12V connected with the center tap is shown in the figure. The 12V terminal is connected to the output of the board. The 220V line input by the has 220V voltage.

Use power: within 300

The frequency of this board will fluctuate due to the input voltage fluctuation (50HZ)

Start voltage: 8V

Undervoltage protection: 7V (need to choose, if undervoltage protection is required, the frequency will fluctuate with the voltage)

The default delivery is frequency stability, no undervoltage protection

Polarity protection: This board has the function of input positive and negative polarity reverse protection

Solder-free terminal: Input and output use solder-free terminal wiring, no need to solder, use screwdriver for wiring

Precautions:

1. The 12V end of the must be a double 12V structure of 12V+12V (the 12V end is a three-wire structure)

2. Single 12V (only two lines at the 12V end) cannot be used.

3. The wiring must be connected to all the wires of the before powering on and testing the machine. Do not power on while connecting.

4. The output of this inverter board is a square wave, which is not suitable for fan motor loads, because the fan motor with a square wave will generate heat and buzz. Low speed, etc. Series motors such as hand drills can be used.

5. If you want to output enough power, you need to ensure the input power, small battery, thin input line, small , it is impoible to output high power.

6. Leakage inductance s cannot be used for this board, such as microwave oven s, paging stations, and s on launch pads. Several silicon steel sheets are inserted between the two primary and secry stages of such s, and there is no-load current and power consumption. very high.

7. This board does not support the removed on the UPS

8. The s wound by yourself are not suitable for this board. Most of the s wound by our friends do not meet the standard due to the small number of turns. As a result, after connecting the driver board, the no-load current is huge and the driver board is burned out.

8. It is strictly forbidden to connect the high frequency to this board, otherwise the driver board will be damaged

Package List:

One * Module

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.