LIS344 Tilt Angle r Dual Axis Inclinometer Accuracy 0.1 Resolution 0.01

LIS342Dual-axis InclinometerAngle rFour Directional Voltage Switch Output

Output Mode:RS232 / TTL (Optional)

Applications:

1.Hydraulic elevator platform2.High-altitude working vehicle3.High-voltage tower detection4.Pan-tilt leveling5.Direction measurement based on inclinationEtc.

Introduction:

LIS344 is a dual-axis inclination switch,with a measurement range is +/- 90°, the output cable turns to closed (or disconnected) in case the measured inclination is larger than alarm threshold value, if otherwise, the output cable is normally open (or closed) if the measured inclination does not reach alarm threshold value. Users are not required to purchase an extra relay since an embedded relay has been equped in the product. Max current may reach as high as 1A at normally closed status, and alarm threshold value can be determined as per the practical situation. It is characterized by its small size, high consistency and stability. As a highly cost-effective inclination switch, it is able to work under an industrial range of temperature from -40℃～85℃.Features:1.Dual-axis inclination detection optional2.Arbitrary setting of alarm threshold value3.Two-channel alarm single-line4.Wide voltage input: 9～35V5.Small size: (91*40*26mm) (customizable)6.Shock resistance>2000g7.High resolution：0.01°8.Full range of accuracy: 0.1°9.Wide range of working10.Temperature: -40～+85℃11.67 Protection

With 1.5M wire cable:

Electrical characteristic

Parameter

Condition

Min

Typical

Max

Unit

Power supply

9

12V

35

V

Current

80

mA

Normally closed max current

100

mA

Operating temperature

-40

+85

℃

Store temperature

-55

+100

℃

Performance

Parameter

Parameter

LIS344

Unit

Measuring range

±90

°

Measuring axi

X-Y

Alarm axi

+X-X+Y-Y

Zero temperature drift

-45～85°

±0.01

°/℃

Frequency response

100

Hz

Accuracy