Lingke LK-188 electric shaver travel portable rechargeable men's beard knife

Additional tax points will be charged for invoicing. Please consult customer service for details
Product Introduction
Product Name: Portable Shaver Product Weight: 200g
Product Model: LK-188 Product Size: 12.5 * 3.5 * 8.8CM (including box)
Power: 2W Packing quantity: 150pcs
Applicable voltage: 220V Packing specifications: 42 * 25.5 * 51cm
Product configuration
Style 1: Black set (includes: main body+brush+instruction manual certificate, only shaving function)
Please carefully read the style before placing an order. Thank you
[Charging Method]
1. Be sure to use AC 220V/50Hz for charging
2. Turn off the switch, push out the charging pin, and plug it into a power outlet.
3. When the switch is not turned off, it cannot be charged.
4. When charging, the charging indicator light is on.
5. The standard charging time is 8 hours.
【 Precautions 】
Do not charge in areas with a rated voltage exceeding 240V, otherwise malfunctions may occur.
Do not charge continuously for more than 24 hours, and do not charge when the temperature is below 0 ℃ or above 40 ℃, otherwise it will shorten the battery life.
Do not rinse the body with water, and do not bring it into the bathroom for use, otherwise it may malfunction.
When the body is dirty, a soft cloth can be dipped in neutral detergent to wipe it off. Do not use alcohol or gasoline for wiping.
When abnormal situations occur during charging or use of the product (such as odor, temperature, or abnormal sound), the power should be immediately cut off and the use should be stopped.
Proper use and maintenance of electric shavers can not only achieve satisfactory shaving results, but also extend the service life of electric shavers. Attention should be paid to the following aspects when using.
1. When installing the power supply, attention should be paid to the polarity of the dry battery or charger to prevent the motor from reversing and damaging the fixed and moving blades.
2. When shaving, the fixed blade should be slowly pushed against the face, moving against the direction of beard growth to allow the beard to smoothly enter the mesh. If you move along the beard, it will overwhelm the beard, which is not conducive to the beard entering the mesh.
3. Electric shavers are not suitable for shaving long beards, so it is better to shave them every 4 days or so. If the beard is very long, it should be cut short with a clipper or small scissors first, and then shaved off with an electric shaver. If there are no push scissors or small scissors, the multiple shaving method should be used. First, the fixed blade (mesh cover) should touch the skin in a vertical direction with the beard, shave the beard shorter, and then follow method 2.
4. When using an electric shaver with a push shear, the blade of the push shear should be moved at a perpendicular angle to the face in order to shave the beard completely.
5. Once there is a stop rolling phenomenon during shaving, the power should be turned off and restarted. After the motor rotates normally, continue shaving.
6. The fixed blade of an electric shaver is very thin and should not be forcefully pressed to deform or damage it.
7. After use or long-term storage, the battery of a dry battery electric shaver should be removed to avoid moisture and leakage, which may cause unnecessary corrosion damage. After using an AC electric shaver, the power should be cut off and the plug should be unplugged to ensure safety. Rechargeable electric shavers should not discharge the power source excessively
If the battery runs low, it should be charged before use. If it is not used for a long time, it should also be charged regularly (about three months).
8. Regularly add a small amount of lubricating oil to the bearing parts to reduce wear. Non wet electric shavers should not be cleaned with volatile chemicals such as water or alcohol. If the blade is not made of stainless steel material and is not used for a long time, a thin layer of oil should be applied to the blade to prevent rust and damage.
9. After each use of the shaver, use a small brush to clean the hair and other dirt. Do not let the dirt accumulate, otherwise the motor may get stuck or the transmission may be blocked. Once the debris and oily skin solidify on the blade, it will affect the sharpness of the blade.
[Precautions for Goods Receipt]
1. In order to protect your interests, please check the transportation status with the personnel in person when signing for the product. If the product is damaged during transportation, please refuse it directly. We will be responsible for full compensation or replacement for you. If any damage, defects, or missing goods are raised after signing for the product, our store will not accept it.
2. Please make sure to keep your mobile phone and other contact information open when receiving the goods. If the goods are returned due to personal reasons (such as the phone being turned off, no one answering, incorrect address or phone number, or unreasonable requests), our store will not be held responsible. If the products or color boxes are damaged as a result, our store will charge corresponding fees as compensation.
Precautions for Goods Receipt
After sales issues
1. Welcome to our store. We specialize in selling high-performance shavers, and counterfeit products are available for purchase with confidence.
2. Our store's products can be returned or exchanged within 7 days without any reason. For products within 3 months, the packaging is guaranteed to be complete (eligible for return or exchange), and the return shipping fee will be borne by the customer.
3. If there are any quality issues, please contact our customer service for a satisfactory response. Thank you