Lighting To RJ45 OTG Adapter Wired Network Cable Hub with USB 3 Camera and Charge Port for hone ad F Drive

THERE HAVE TWO TYPES , FOR IOS AND FOR USB C PHONE TYPE ,PLZ E SURE THE TYPE YOU WANT BEFORE YOU BUY ,THANKSFOR IOS :Product descrtion:

1. Lighting conversion adapter is a kind of Internet artifact specially developed to soe the usage data of hone/ad/od Touch devices and interruption. Through the RJ45 interface, you can connect the hone/ad/od Touch to the Internet to achieve Internet acce.2. Equment s:Working voltage: 3.3V-4.0VLighting working current: ≤100mARJ45 interface: support 10/100 routing network cablecharging current: 500mA-2100mAThe above relevant data is measured by the personnel of the company's development department. The actual current and nsmiion speed vary depending on the type of equment and acceories3. CompatibilityCompatible with iOS 9.1 and higher versions of Lighting interface iOS devices4. FeaturesUsing the RJ45 port, you can easily get the thrill of surfing the Internet without ering,grabbing red packets without delay, and playing games without freezing;Soe the problem that some hone devices cannot charge at the same time while using OTG acceories.5. Matters needing attentionThis adapter cannot dial-up to the Internet by its, you need to provide automatically through the device through the DHCP service.FOR USB C PHONE2 in 1 type-c 100M +60W (PD charging)2. Plug and play. This adapter does not require any , drivers or complicated installation proce. Portable and high-quality design can provide better heat diation. Special internal anti-interference design, no need to worry about interrupting the signal.3. Widely compatible with high-end mobile phones & laptops and tablets on the market;4. Currently supported mobile phone models: Xiaomi mate3, Xiaomi 6, Xiaomi 9, Xiaomi C9, Xiaomi 8, mate9, Honor 30, p30, p30pro, p20, p20pro, mate30, mate30pro, mate40, mate40pro, p40, mate10, mate10pro, p40pro, Samsung , , LG, v30 Lenovo S5GT