LED Lead Cable Battery Clamp Clip EC5 Red-blaClips For Car Jump Starter Smart Booster

Please note ( For Smart battery Clip ) ：

1. if your jump starter without enough power, after connect with our clip cable, it will warn with beeping .

2. if your jump starter has power, but only 3 built-in batteries, our clip cable will warn with beeping too, please connect with jump starter that has 4 built-in batteries .

Red for "+", blafor "-"

Functions:

1.Anti Short connection protection:Connect the red clip with the blaclip when the power is on,No damage,no sparkle2.Anti Over-discharge protection:Low voltage start,LED will f at the frequency of 1HZ if the voltage is below 10.5V3.Anti-re charge protection:After the car is started,Anti-re charge current is le than 1A4.Anti Re polarity protection:Re connection with the Negative and positive end of the clamp and battery terminal,No damage, no sparkle5.Anti High Temperature Start:When the temperature of the jump starter is higher than 80 Cende,the smart cable will prevent the current flow,to protect the jump starterInstruction:1. Plug the cord of jumper cable into the jumper starter's socket.2. Connect the red battery clamp of jumper cable to the vehicle'spositive (+) battery and connect the blato the negative pole.3. Start the vehicle when jumper cable indicator light turns green.Packing list :1* clip

A+ Battery Clip :

Note:

This link just for clip , without battery included ,hope you can understand ,thanks !

--------------------------------------------------------------------------------------------------------------------------------------------------------

LED Battery Clip :

Note:

This link just for one clip , without battery included ,hope you can understand ,thanks !