LED Laser Double Projector Lights Waterproof Xmas Halloween Party Landscape Lamp EU Plug Eurocode

Package Included:
1 x Projector Light
12 x Slideshow
1 x Ground Stake
1 x Mounting Plate
1 x Remote Controller ( included)
1 x AC Supply Transformer
1 x English User Manual

Specifications：
Name: Laser Projector light
Shell material: ABS engineering plastic
Colour: Black.
Input Voltage: AC 100-240V 50/60Hz 1000mA
Output: 12V 500mA
Maximum : 12W
LED: RGBW four colors
Operation mode: Automatic
Working temperature: -20~50°
supply waterproof rating: IP44
Light body waterproof rating: IP44
Projection source wavelength: red light bead (620-625nm), green light bead (520-525nm) blue light bead (460-465nm) white light bead ( temperature 1500-15000K)
Cast film: stereo pattern, standard 12, can customize the number of patterns and slides
Irradiation Area: 30-50 square meters (up to 20 meters)
Optimal Irradiation range: 5-10 meters 15-30 square
Remote control: 433Hz
Remote Control By: 1 x CR2025 (included)
cord: 5 meters flat wire 24nd double wire
Dimensions: 142*109*118mm/5.6*4.3*4.6inch
Inner box size: 190*150*125mm/7.5*5.9*4.9inch
Plug: EU Plug(We will be based on your country to send the corresponding adapter plug)

Features:
- Water wave light and projector light in one, not enhances the party atmosphere, creates a happy and harmonious atmosphere, but also is a good holiday gift, as a fun toy for kids.
- 12 Slides in patterns for Christmas, Halloween, Easter, Carnival, Thanksgiving, Birthday Party, lively and interesting patterns that to your child and enrich your life.
- Four colors specially designed: red, white, blue, green, moving water wave effect to create a beautiful and peaceful night atmosphere is the best choice for your child to fall asleep.
- This projector is equipped with two projection heads, including a water ripple effect and 12 slide pattern projections. The water ripple effect has a total of 10 colors can be adjusted by remote controll, and the projected picture can be dynamically adjusted to a stationary state. Perfect for any indoor and outdoor celebration moments or ambience.
- With Remote Controller ,you can change different modes such as dynamic, fixed, twinkle, and off, energy efficient to save you money. It also has a timed loop function, button "2H/4H/6H" for .
- IP44 waterproof design, Works well in sunny or rainy or snow days. Indoor and outdoor use, ideal for home, walls,ceilings wendings, parties in Halloween and Christmas..But don't soak it directly in water.
- A ground stake for outdoor and a base for indoor.You can easily install it without any tool.

Assemble:
1. To attach ground stake, remove the screw from the stake.
2. Use the screw to attach the stake to the pivot mount (see fig. 1, as user manual).
3. Plug the 2-prong adapter into the outlet on the supply transformer.
4. Screw on the weather-resistant cap tightly to help protect the connection from weather.

Installing Slides:
1.Unscrew and remove the two screws holding the slide frame in the projection light casing. Remove the slide frame (see fig. 2, as user manual).
One slide is already put in the slide frame.
In order to install a different slide, remove the preloaded slide by pushing it out of the frame while careful to avoid touching the slide images.
The slide should easily out.
2. Reinsert the slide frame into the projection light casing, careful to orient the slide frame correctly with the arrow on the frame facing the front of the projection light (see fig. 2, as user manual).
Replace the screws. Note: If you notice that the images seem to be moving backward after you turn the projection light on, you may have installed the slide frame backward. If this is the case, remove the frame, turn it around and re-install it.

Placing the Projection Light:
- The projection light can be staked into the ground.With the stake removed, it can also be mounted to a structure using a sturdy hanging clamp and safe cable.
- Place light approximately 10 to 15 feet from the projection surface (see fig. 3, as user manual). After the light is turn down you may need to adjust the distance to get the best results.
Note: If you insert a different slide, you may need to adjust distance for clarity.
- Position the angle of projection by loosening and tightening the angle adjustment screw (see fig.4, as user manual).
- The projection light must be positioned so that the fan vent is on the bottom (see fig. 4, as user manual). Also, be sure that the fan vent is no danger of blocked. If the air vent is blocked, the unit and slide are in danger of damaged.
- use supplied transformer connected to a properly grounded outdoor outlet. Do not use with dimmers.
- For the service life of the product, the proposed work for six hours, rest for half an hour after the use of.












a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a