LED Intelligent Display 1206D Charger 6A 12V Car Battery Charger For Lead-acid Batteries

Descrtion:
1.&sp;The three section type pulse charging
&sp; &sp;鈶?Constant-current charging &sp; &sp;Increase the charging speed
&sp; &sp;鈶?sp;Constant-voltage charging &sp; &sp;Eliminate&sp;over charge,increase&sp;the&sp;service&sp;life&sp;of&sp;thebattery&sp;
&sp; &sp;鈶?sp;Floating charging mode &sp; &sp; &sp; &sp;Trile maintenance,keep full
2.&sp;Charger smart panel
&sp; &sp;Five kinds of charging mode selection,ital display charging current, charging voltage.
3.&sp;Anti-loss&sp;and current-limiting function
&sp; &sp;Protect the charger and battery, greatly extend the life of the battery and charger.
&sp; &sp;鈶?Anti-loss&sp;function:&sp;
&sp; &sp;When the charger is connected with the battery, the battery is prevented from vulcanized to
&sp; &sp;prevent the battery from losing water.
&sp; &sp;鈶?Current-limiting function:&sp;
&sp; &sp;When the battery is charged full to continue charging is very dangerous, this charger can be based on
&sp; &sp;the capacity of the battery, adjust the charging current when the switch on, protect the charger and battery.
4. Prevent&sp;anti-charge function
5.&sp;Microcomputer control and management
&sp; &sp;Using micro controller MCU, intelligent control and management of battery charging, charger full of self stop.
6. Anti impact delay start function
&sp; &sp;Can reduce the starting current and suression of dramatic changes in the current flowing in a circuit,
&sp; &sp;to prevent the high voltage impact and protect the charger and battery are not damaged.
7.&sp;Multle safety protections
&sp; &sp;With the battery online ,input high voltage or high current protection,anti short circuit,
&sp; &sp;anti over charging, anti overvoltage and functions.

Specification:

&sp; Charge Current
&sp;5A ~ 6A

&sp;Alicable Battery Voltage
&sp;12V

&sp;Rated Input Voltage
&sp;110V ~ 240V

&sp;Rated Frequency
&sp;47Hz ~ 63Hz

&sp;Full Load Efficiency
&sp;鈮?7%

&sp;Temperature Range
&sp;- 20鈩?~ + 90鈩?br />
&sp;Product Weight
&sp;0.23kg

&sp;Product Size
&sp;153 * 60 * 80mm &sp; &sp; &sp; &sp; &sp; &sp;&sp;

Product Instruction:
1.&sp;Che whether the rated voltage of the battery to be charged is consistent with the output voltage of the charger.
2. As required,connect the charger and battery to be charged .
3.&sp;Che the power suly voltage and the charger rated input voltage is consistent
4.&sp;Connected to the power suly, ital tube display said charging voltage and current.
5.&sp;If the ital tube is not on, please quily disconnect the power suly, che the power suly,
&sp; &sp; battery, charger and all the wire is normal
6.&sp;After charging, please disconnect the power suly before disconnect the connecting wire of the battery.

Note:
1.&sp;The charger is designed for 12V Acid battery / Colloid battery, and can not be used as a power source for electronic devices.
2.&sp;Charger with high danger, such as fai, please contact the dealer or manufacturer, users and non professional
&sp; &sp; maintenance personnel of the company is strictly &sp; prohibited to open the charger
3. Prohibited to use in humid, high temperature, flammable and explosive gas envnment.
4. Prohibited to charge the non-s.
5. Try not to short circuit and re connection!(Although there is protection, but not recommended for)

Paage Included:
1 X&sp;Car Battery Charger (with&sp;Adapter Plug)
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a