This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeComputingComputers & AccessoriesComputer ComponentsComputer CasesLED Driver Charging Constant Current Voltage Step Down Buck Module
GH₵ 134.46
GH₵ 269.8950%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 18.93 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 18.93
Ready for pickup between 23 August & 28 August when you order within next 19hrs 7mins
Door Delivery
Delivery Fees GH₵ 30.83
Ready for delivery between 23 August & 28 August when you order within next 19hrs 7mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
Begseronia
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
LED Driver Charging Constant Current Voltage Step Down Buck Module
Feature:
This module uses the LM2596 , high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the TI op amp control output current, so the overall output is very stable.
This module uses the Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow .
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: 0.5%
Voltage regulation: 2.5%
Operating temperature: -40C to +85C
Dimension: 48 x 23 x 14mm (L x W x H)
charging method:
1. Make sure the float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesnt need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the and try to charge.
(1,2,3,4,5 steps are for the module input connected to the supply, output-load is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, machine.
(1,2,3,4 steps are module input connect to the supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
LED Driver Charging Constant Current Voltage Step Down Buck Module
Feature:
This module uses the LM2596 , high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the TI op amp control output current, so the overall output is very stable.
This module uses the Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow .
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: 0.5%
Voltage regulation: 2.5%
Operating temperature: -40C to +85C
Dimension: 48 x 23 x 14mm (L x W x H)
charging method:
1. Make sure the float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesnt need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the and try to charge.
(1,2,3,4,5 steps are for the module input connected to the supply, output-load is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, machine.
(1,2,3,4 steps are module input connect to the supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Feature:
This module uses the LM2596 , high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the TI op amp control output current, so the overall output is very stable.
This module uses the Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow .
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: 0.5%
Voltage regulation: 2.5%
Operating temperature: -40C to +85C
Dimension: 48 x 23 x 14mm (L x W x H)
charging method:
1. Make sure the float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesnt need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the and try to charge.
(1,2,3,4,5 steps are for the module input connected to the supply, output-load is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, machine.
(1,2,3,4 steps are module input connect to the supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
LED Driver Charging Constant Current Voltage Step Down Buck Module
Feature:
This module uses the LM2596 , high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the TI op amp control output current, so the overall output is very stable.
This module uses the Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow .
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: 0.5%
Voltage regulation: 2.5%
Operating temperature: -40C to +85C
Dimension: 48 x 23 x 14mm (L x W x H)
charging method:
1. Make sure the float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesnt need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the and try to charge.
(1,2,3,4,5 steps are for the module input connected to the supply, output-load is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, machine.
(1,2,3,4 steps are module input connect to the supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Specifications
Key Features
- Reasonable price
- Durable and practical
- Top Sales Item
- Big Discount
- Best Material
- Fast Delivery
- After testing & Good Service
- Big Demand
- Easy to use
- Exquisite Workmanship
- Well Made
- Best Choice and best discounts
- Customer Care is Our Top Priority
- Offer is Subject to Availability
- Big Sale
What’s in the box
1X LED Driver Charging Constant Current Voltage Step Down Buck Module
Specifications
- SKU: GE779EA3T4AIJNAFAMZ
- Product Line: Nigeria
- Model: JMVANLIN154871
- Production Country: China
- Size (L x W x H cm): 4 x 2 x 1
- Weight (kg): 0.1
- Certifications: Fair Trade
- Color: Multicolore
- Main Material: Patent Leather
- From the Manufacturer: N/A
- Care Label: N/A
- Shop Type: Jumia Mall/Food
- Warranty Address: N/A
Verified Customer Feedback
This product has no ratings yet.
LED Driver Charging Constant Current Voltage Step Down Buck Module
GH₵ 134.46
GH₵ 269.8950%
Questions about this product?