LD25 Electronic Load USB Interface Resistor Discharge Battery Test Adjustable Current Voltage with LED Display Fan New,A NO

NOTE:

This product has no reverse connection protection, the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired .

Application suggestions:

Charger, power supply and other device manufacturers want long-term discharge or batch aging test of products, please choose LD35 (LD25 is not applicable)

Specifications:

Product Model: LD25 / LD35

Rated operational voltage: DC4-25.0V

Max discharging power: 25W / 35W

Rated operational current: 0.25-4.00A / 5.00A (when fan don’t work, the minimum constant current is 0.05A )

Fan Speed: Oil bearing intelligent temperature control fan,speed 5800±10%RPM(LD 25); Hydraulic bearing intelligent temperature control fan,speed 8000±10%RPM(LD 35)

Constant current accuracy: ±（2％+3 digits）

Constant voltage accuracy: ±（2％+3 digits）

Heat dispatch method: Intelligent temperature control fan + All aluminum fan

Working temperature: -10-40 degC

Adjustable potentiometer: Precision multiloop adjustable potentiometer

Display mode: 4 bit LED tube

Expansion port: Micro USB port、Type-C port

Product weight: About 57g

Product size: 84x41x28mm  

Product Brief Introduction:

Micro USB port:MAX current 2A

USB male port (widened power wire,MAX current 5A）

Type-C port:MAX current 4A

All aluminum heat sink

Intelligent temperature control fan

4 Bit LED tube

Precision multiloop adjustable potentiometer

"SET" button:press "SET" to switch display status, Press and hold the button to set the load output recovery mode after protection removed.

"ON/OFF" button: press the button to open or close output. Press and hold the button to set the boot default status of open or close.

MORE Information :

LD25 user manual download page : http://www.mediafire.com/folder/q2o63jc8df6qc/LD25

Youtube video: https://youtu.be/M5gLYlfJKyg

Functions:

1.Protection function: OVP (over-voltage protection): there is OVP at 25-30V; it will be damaged permanently over 30V.at OVP, LED show OVP). OTP(over-temperature protection): load temperature is over 80℃, the LED show OTP. OPP(over-power protection): the power is over 25W, the LED show OPP.

2.Set output recovery mode after load entering protection status, manual or automatic

3.View the voltage value, current value and power value of the load.

4.Intelligent temperature control fan. When the power is over 10W or the temperature is over 40℃, the fan will start.

5.Precision multiloop adjustable potentiometer: you can adjust the current precisely, upto 0.01A. so you don‟t need to adjust a big current mistakenly to damage the power supply. So the power supply will not be damaged due to mistakenly adjustment, you can set default boot status freely, open or close.

Operation Guide:

The load is powered at the range of 4-25.0V (the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired), the LED will be flashing to remind current setting value, waiting for output. Press ON/OFF button, open output to start work.

1.Adjust output current value. Turning the rotary control clockwise increases the value and anticlockwise decreases the value. According to the needs of the situation, the potentiometer can realize coarse adjustment or fine adjustment. The fine adjustment can be accurate to 0.01A.

2.Adjust LED display status Press "SET" to adjust the LED display status, default display output current value. Press "SET" button to display *.**A、**.*P、**.*V followed by recycling.

3.Open or close load output Press "ON/OFF" button, you can open or close load output

4.Set load default boot status (open or close status, Factory default close status) Press and hold "ON/OFF" button to set load default boot status freely. Press and hold "ON/OFF" button, if the LED will display "--ON", show in pic

5.The load will open output when power on next time; If the LED display"-OFF", show in pic 5 show, the LED will display current value flashing at last shutdown when power on next time, then press "ON/OFF" button to open output.

6.Set the load output recovery mode after protection removed. Press and hold "SET" button to set output recovery mode after protection removed. Press and hold "SET" button, if the LED will display "--ON", show in pic 4, and the protection was removed, the load will recover to work; If the LED display"-OFF", show in pic 5 show, and the protection was removed, the LED still show protection status, then press "ON/OFF „button, the display will display present setting current flashing, then press "ON/OFF„ button again, the load recover to work.

NOTE: Please check the output current of power bank carefully. The current of the general power bank is generally small, so adjust smaller current when the load was used.

Application:

Assist to measure Micro USB cable good or not.

Assist to measure Type-C cable good or not.

Assist to measure output current capacity of charger good or not.

The usage of large batch ageing test at the charger factory.

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.