LCD Iron Phosphate LiFePO4 Acid Lead Capacity Indicator Digital Voltmeter Tester 12V - Green Light Interior - Green backlight

Description:

Head voltage range: DC6-63V (do not overvoltage)1, the product has protection, will not burn back;2, lead-acid common, through the back button to adjust;3, can display the symbol + percentage or symbol + voltmeter, two display mode free to switch4, the product two lines, wiring is simple, with a wiring socket, line length 300mm;5, all the specifications and function options are set by the back button, no electric iron;:
Operating voltage: DC6-63VWorking current: 5MASleep consumption: 12uA (12V is )Display: LCD with backlightNet weight: 19GSize: 61.3 * 33.3 * 13.5mmInstallation openings: 58.5 * 28.5mmNote:* The product is designed according to the discharge curve, so the discharge is relatively accurate;* This product is called for a single standard voltage 3.6V / 3.7V , does not include the nominal voltage of 3.2V iron phosphate ;* This product is called lead-acid for the nominal voltage of 12V lead-acid batteries, water batteries, batteries, etc., does not include the voltage 16V lead-acid batteries;The following specifications are commonLead acid: 12V 24V 36V 48VLithium : 2 string 3 string 4 string 5 string 6 string 7 string 8 string 9 string 10 string 11 string 12 string 13 string string 14 string stringPower comes with buttons, self-modify , easy to set up
percentage + voltage dual displayComes with a switch to turn off the displayPower percentage / voltage / off button 3-speed cycle switch


Setting Instructions:1. when setting, refer to setting step operation;After the 2. is conducted, the conductive object is prevented from contacting the back part of the electronic component to prevent short circuit damage. for lead acid: P; : L; iron : FBattery type, rangeLead acid 12V, 24V, 36V, 48VLithium 2 string 3 string... 14 string 15 stringLithium iron phosphate 3 string 4 string... 15 string 16 stringSet step1. disconnect the display module , and press and hold the settings button, when the module is connected to the supply, then release the settings key,Current display for display screen;2. short press setting button, select Specification P/L/F (P=12V, L=3.7V, F=3.2V, iron phosphate );3. short press function keys to set the string, function keys and settings keys, up or down select serial number; for example, 4 12V lead-acid 48V, set to P4; the same way, 3 3.7V batteries in series, set to L3.4., press the function key to enter the advanced settings interface, use the settings button to select S1-S5, and use the confirmation key to select or cancelMode, the symbol within the small box and S1-S5 corresponding, such as S3 corresponding to the symbol of third small lattice, select the showShow, do not display cancelled)5. set up after the re energized, the automatically save the data set.
Package Includes:

1 x Tester



a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a