LCD Display Battery Capacity Tester MAh MWh 18650 Lithium Battery Digital Type-C Measurement Battery Power Detector Module

Package : Type-Cis_customized : YesModel Number : Battery Capacity TesterOperating Temperature : Measurement Battery Power Detector ModuleDissipation Power : LCD Display BatterySupply Voltage : 18650 Lithium BatteryApplication : BatteryCondition : NewType : Voltage RegulatorBrand Name : Ziqqucu : Mainland China
A:Specification:：Product name: 18650 battery capacity internal resistance tester charging and discharging integrated version：Working voltage: DC5V：Detection voltage: ≤DC5V：Capacity measurement range: 0~99999mAh：Energy measurement range: 0~99999mWh：Battery internal resistance measurement: support, measurement error is about 10%：Display real-time voltage: support：Display real-time current: support：Display real-time power: support：Log run time: support：Working mode indication: support：Current Status Indication: Supported：Simultaneous discharge: not supported (simultaneous discharge of 18650 battery Test① and external power supply Test② is not supported)：Discharge load: 10W 8ΩJ cement resistance × 2：Discharge current selection: ≈0.5A or ≈1A：Charging interface: Type-C：External discharge interface: Type-C：Preset discharge stop voltage: 3V (not adjustable)：Preset full stop voltage: 4.2V (not adjustable)：Data storage: The measurement data is not saved, and the accumulated data is automatically cleared when the power is turned off or when the working mode is switched.：Product size: 108×85×24mm：Product weight: 80g (net weight)Charge and discharge time reference:：AUTO (automatic mode): The battery (discharged in advance) is charged ~ the default current is about 1A to discharge 1704mAh ~ it is fully charged again to trigger the program to stop, which takes 437 minutes and 23 seconds.：DSG (discharge mode): When the battery is fully charged, it uses a current of about 1A to discharge 1681mAh, which takes 118 minutes and 55 seconds.：CHG (Charging Mode): The capacity and energy are not measured during charging, only the time is recorded, which takes 164 minutes and 51 secondsB：Specification:：Product name: 18650 lithium battery true capacity tester ：Display accuracy: 0.1 ：Measurement accuracy: 1mAH ：Power supply voltage: DC5~12V/18650 battery power supply ：Standby current: 5~7mA ：Discharge current: about 500mA ：Load power: 10W8Ω：Appearance size: 110*80*25mm ：Installation size: 72*53 ：Installation aperture: 3mmAbout 18650 battery:：The minimum discharge stop voltage of 18650 battery is generally: 2.75V. Under normal circumstances, when the voltage drops to 0.875 times the rated voltage (3.24V) ：It should be charged, and then continue to use, the voltage will drop rapidly, there may be over-discharge and damage, affecting the life. (Recommended discharge termination (The voltage is set to 3.5V) ：The charging voltage is generally: 4.20V-4.3V/4.35V.Measurement time calculation:：Assuming that the battery capacity is 2000mAH, the discharge current of this tester is about 500mAH, (2000:500=4), and the measurement time is about 4 hours about.Package Contents:：18650 Battery Capacity Detector module Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.