Lambda 5 Wires O2 Oxygen Sensor For Audi A3 Seat Altea XL Leon Toledo Skoda Octavia 1.6L 06A906262BR LZA07V1

Warranty: Yes, 1 year warranty

Port Material: Copper andPlastic

Condition: In-stock, Brand-new, 100% test before send out

Applications:

For Audi A3 8P1 [2003-2012] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For Audi A3 8P7 [2008-2013] Convertible 1.6 1595ccm 102HP 75KW (Petrol)

For Audi A3 8PA [2004-2013] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For Seat Altea 5P1 [2004-2015] MPV 1.6 1595ccm 102HP 75KW (Petrol)

For Seat Altea 5P1 [2004-2015] MPV 1.6 LPG 1595ccm 102HP 75KW (LPG)

For Seat Altea XL 5P8 [2006-2015] MPV 1.6 1595ccm 102HP 75KW (Petrol)

For Seat Altea XL 5P8 [2006-2015] MPV 1.6 LPG 1595ccm 102HP 75KW (LPG)

For Seat Leon 1P1 [2005-2013] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For Seat Leon 1P1 [2005-2013] 1.6 LPG 1595ccm 102HP 75KW (Bi-Fuel)

For Seat Toledo MK III [2004-2009] MPV 1.6 1595ccm 102HP 75KW (Petrol)

For Skoda Octavia 1Z3 [2004-2013] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For Skoda Octavia 1Z3 [2004-2013] Hatchback 1.6 LPG 1595ccm 102HP 75KW (Petroleum Gas (LPG))

For Skoda Octavia 1Z5 [2004-2013] Estate 1.6 1595ccm 102HP 75KW (Petrol)

For Skoda Octavia 1Z5 [2004-2013] Estate 1.6 LPG 1595ccm 102HP 75KW (Petroleum Gas (LPG))

For VW Caddy MK III [2001-2015] Box 1.6 1595ccm 102HP 75KW (Petrol)

For VW Caddy MK III [2001-2015] Estate 1.6 1595ccm 102HP 75KW (Petrol)

For VW Caddy MK III [2001-2015] Box 1.6 Bi-Fuel 1595ccm 102HP 75KW (Bi-Fuel)

For VW Caddy MK III [2001-2015] Estate 1.6 Bi-Fuel 1595ccm 102HP 75KW (Bi-Fuel)

For VW Golf MK V [2003-2008] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For VW Golf MK VI [2008-2015] Estate 1.6 1595ccm 102HP 75KW (Petrol)

For VW Golf MK VI [2008-2015] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For VW Golf MK VI [2008-2015] Hatchback 1.6 Bi-Fuel 1595ccm 102HP 75KW (Bi-Fuel)

For VW Golf Plus [2005-2013] Hatchback 1.6 1595ccm 102HP 75KW (Petrol)

For VW GolfPlus [2005-2013] Hatchback 1.6 MultiFuel 1595ccm 102HP 75KW (Petrol/Ethanol)

For VW Golf V MK V [2003-2009] Estate 1.6 1595ccm 102HP 75KW (Petrol)

For VW Jetta MK III [2005-2011] Saloon 1.6 1595ccm 102HP 75KW

For VW Touran 1T2 [2003-2010] MPV 1.6 1595ccm 102HP 75KW

Oxygen Sensor's Location:

How do I know the O2 sensor is good or not?

Check engine light on

A reduction in fuel economy.

Your catalytic converter fails unexpectedly

Exhaust emiions reach undesirable levels.

How to install the oxygen sensor?

Step 1 - Some are equped with a heat shield that must be removed before the sensor removal, this is performed by removing anymounting bolts.

Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid strping the old sensor upon removal.

Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.

Step 4 - Its ant that the wiring harne connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement have a universal electrical connector that must be configured to the wiring of the old sensor.)

Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.

Step 6 - Gently tighten the sensor while keeping wiring free from damage, these need to be fairly snug to avoid leakage.

Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.

Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harne. If the car has diagnostic trouble codes, they will need to be cleared.

We accept Credit Card, , WeChat Pay, PayPal, etc.

If you want to pay by PayPal, please contact us. Thanks!

All products will be tested strictly before shping. Please make sure your addre in is matched with your shping addre before you pay the order. And please make sure the mobile phone number and postcode is correct. In addition, Brazil and Chile customers please fill in the correct CPF number, so as to send your goods more quickly.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.