KWHUD HUD 2 Display On~board Computer Car meter RPM Slope Meter for Opel Antara As Corsa 2008~2024 Small oline

Compatible With:

For Opel Antara 2008-2024 oline;

For Opel As 2008-2024 oline;

For Opel Corsa 2008-2024 oline;

Please Note:

1. Not for All Cars before 2007;

2. Not for All Hybrid Vehicles, Electric Vehicles, kup Trucks, Paenger Cars, etc. ;

3. As for the other car model, please ask customer service before placing an order. and Please send us your Car Model/ Year of Production/ Engine Capacity/ Engine Type(oline/ / Hybrid).

Feature:

1. Display Data:Car Speed(KM/H, MPH), RPM, Voltage, Coolant Temperature, Oil Temperature, Consumption, Average Consumption, Date and Time, Driving Distance, Driving Time, Turbo Preure(Note: some cars will not display), Read/Erase Trouble Code, Engine Load, Driving Direction, Altitude, Number of s, Slope Meter(Roll Angle/Pitch Angle).

2. Alarm Function: Overs-peed Alarm, Water Temperature Alarm, Voltage Alarm,igue Driving Reminder, Vehicle Fai Reminder.

3. Size: 156*16*83 mm / 6.14*0.63*3.27 inch;

4. Screen Size: 4.5 inch LCD Screen, Touch on;

5. Systemguage: English/Japanese/Chinese;

6. Power Supply: Car 2 Socket;

7. Interface: 5-Main Interface;

8. With Multi-color Atmosphere Light: e it so cool.

9. Two Installation Methods: Stion the dasard; Stion the front windshield gla.

Packing list:

1 x HUD

1 x 2M 2 Cable

1 x Anti Sl Mat

1 x English Manual

FAQ

1.Can't work normally?

The first time installation requires reading the vehicle protocol and will takes 3 minutes,please wait patiently:

--Put the vehicle in "P"or "N" gear, pull up the handbrake and start the vehicle to ensure that the vehicle is in an idle state;

--Connect the hud to your car 2 socket;

--Turn on the power switch of the hud, the system will automatically scan the vehicle data, it takes about 3 minutes, please wait patiently;

--When screen displays the water temperature and consumption of the vehicle, the initialization is complete, and it can be used normally.

2.No display on the screen, no power?

Chewhether the cable is loosely connected, try to connect it several times. If it still does not work, please change another car to test, and yze whether the interface of the car is broken. If the interface is broken, please repair the interface and then connect the hine again.

3.Unable to shut down or automatically start and stop with the car?

Enter system setting mode, find “shutdown mode”

--01. ligence: The system automatically monitors and shutsdown;

--02. ECU communication fai: It is recommended to selectthis option for oline-electric hybrid vehicles and vehicles withautomatic start-stop function;

--03. Battery voltage is low: judge the battery voltage is lowerthan the set value and shut down, the default is 13.2;

--04. Countdown time: You can adjust the shutdown time arthe vehicle is turned off, the default is 15 seconds (this item isonly for when the hine uses data).