KuWFi 300Mbps Elevator Bridge 2.4Ghz Wireless WiFi PTP PTMPUp to 300 Meter APP Control for Security Monitor

Tips:

1.PTP PTMP Up to 300 Meter. We have obtained in the best environment test. In the actual use process, the Wifi signal is susceptible to other factors, and it is normal to shorten the transmission distance.
2. The bridge is recommended for elevator camera monitoring.




FAQ:

Q: I wan to login WEB UI page for IP Address,but i can not open it .

A:If you need to manage the bridge, you must use a computer to connect to the bridge.Then set a static IP address for the network to access the WEB UI page.(After the configuration is complete, restore the original status. ; Otherwise, the Internet access fails.)
you can set static ip address : 192.168.188.10
Subnet mask： 255.255.255.0




Description：

WBDT201 is a cost-effective elevator-specific wireless bridge with an access distance of 300 meters. It is stable and reliable, with strong anti-interference ability, ensuring the stable operation of the system.

1.300Mbps 2.4Ghz Elevator CPE Bridge

The CPE Bridge 2.4GHz Wi-fi network maximum rate of 300Mbps.Two RJ45 100Mbps network ports(WAN/LAN Port), providing a faster and more stable network. Make the wi-fi Bridge applicable to more scenarios.

2.AP & Repeater mode

The Wi-Fi Bridge supports universal AP mode and Repeater mode, with a wider range of user application scenarios.

3.Support APP Contraol

Support bridge control via APP for easier setup.Better meet the user's setting requirements.

4.Built in 6dBi ntenna

Built-in 6dBi directional antenna, PTP/PTMP connect distance up to 300 meter, very suitable for elevator wi-fi camera monitoring.

5.Support One-click pairing

Through the buttons on the bridge, the two Bridges can be pairing with one click, eliminating the tedious pairing process.Realize point-to-point connection.

6.Supports two modes of power supply

The CPE Bridge supports 12V PoE power supply and DC 12V power supply.The power supply mode of POE solves the problem that the network bridge can be placed remotely through the network cable.(Package does not include DC 12V power supply)

Packing list:

2pcs CPE Bridge
2pcs Ethernet Cable
2pcs 12V POE Power Supply
1pc Quick Start Guide



FAQ:

Q: I wan to login WEB UI page for IP Address,but i can not open it .

A:If you need to manage the bridge, you must use a computer to connect to the bridge.Then set a static IP address for the network to access the WEB UI page.(After the configuration is complete, restore the original status. ; Otherwise, the Internet access fails.)

you can set static ip address : 192.168.188.10

Subnet mask： 255.255.255.0