KS42 JoyPad Controller Wireless Controller for Nintend Switch Game Joystick

Feature:

6-Axis Gyro r

Dual motor

RGB Lights

Bluetooth Wirele connection

Wake up function

Auto-fire

Adjustable Vibration

Product Descrtion:

Transmiion medium Bluetooth 2.1

Carrier Frequency 2.402-2.480GHz

Protocol Bluetooth 2.1+EDR

LED 8 LEDs with multle colorful lights

Pairing After the handle enters the pairing mode, if the pairing is not succeful within 2.5 minutes, it will automatically sleep

Battery left and right a polymer lithium battery 3.7V/500mAH

Battery life: 6.5 hours of continuous work once fully charged

Working voltage 3.7V-4.2V

Charging voltage 5V

Temperature cycle and high and low temperature working requirements -10℃~50℃

Required storage temperature -20℃~70℃

Drop test height 1.2m 6 sides 2 cycles Marble floor

Key force Silicone key force is 160g, light touch switch force is 160g

Key life (ABXY, arrow keys, L2, R2 keys) silicone keys 500,000 times. L, R, Home, Camera, +, —, T keys 100,000 times

Product list:

Charger cable

User manual

Game controller *1

Bracket*1

Multifunctional gamepad, supports most mainstream game platforms

5.3.1 Wirele Mode

In the off state: long pre the following key combination to enter pairing mode

Switch mode: long pre the pairing on for 2 seconds, the LED1-LED4 marquee flashes quickly. The channel light is always on when the connection is succeful

5.3.2 Turbo and AUTO TURBO function

1. In any mode

Pre the TURBO key + A/B/X/Y/L1/L2/R1/R2 cro key to set the TURBO function

(For the first time) Pre the TURBO key + A key to realize the manual TURBO function (pre and hold the burst)

(Second time) Pre the TURBO key + A key to realize the automatic TURBO function (automatic burst)

(Third time) Pre the TURBO key + A key to clear the TURBO function (clear)

Note: Pre and hold the inp>

2. TURBO speed adjustment (there are three speeds adjustable)

Left handle adjustment method: pre the TURBO on and "-" on, pre the speed to increase one gear, three gears can be adjusted, and cycle in turn

Right handle adjustment method: Pre the TURBO on and add the "+" on, pre the speed to increase one gear, three gears can be adjusted, and cycle in turn

3. Motor vibration adjustment function

Pre and hold the vibration on on the back to adjust the vibration intensity of the motor (the left and right handles can be used as separate handles to adjust the vibration, and the vibration intensity can be cycled in turn). There are five intensities in total, 100%, 75%, 50%, 25%, and 0%.

4. Controller hardware reset

Pre and hold the HOME on for more than 10 seconds to reset the handle hardware.

5. Reconnect the handle

When the handle is matched with the previous device, you only need to pre the HOME on after the handle is in standby to connect back to the previous device.

5.3.3 Charging

Shut down and charge, led 4 lights flash slowly, fully charged and off

5.3.4 Play mode while charging

switch: The corresponding channel light flashes slowly and is always on when fully charged.

5.3.5 Lighting Control Instruction

1. T+R3/L3: Monochrome light constant mode, overall light color change: pre to change a color, sequence: red/yellow/blue/green/purple/orange/white/magic color, cycle change.

2. T+ (double click) R3/L3: breathing mode

The first time: RGB seven-color breathing;

The second time: LED Symphony breathing;

Third time: Turn off the lights.

3. Light brightne adjustment:

T+ rocker up on can increase the brightne of the handle light;

T + rocker down on can reduce the brightne of the handle light.

Back key macro and mapping function:

Macro programming can be programmed: 2 joysticks, L3, R3, cro keys, ABXY, L, R, ZL, ZR, "+" key, "-" key.

Pre and hold the setting on M to enter macro programming (4 indicator lights are always on), then pre the ons you want to set (you can pre one or more, you can pre them simultaneously or in sequence), and pre the ons you want to set After that, release the setting key to indicate that the setting is complete (there will be a vibration prompt). The programming key will store the operation just now, and the next time you pre the programming key, the stored operation can be triggered, which can be used to set combos in the game.

For example: pre and hold the right M on (4 LEDs are on at the same time, do not let go of the M on you hold down) + B on, then pre the A on every second, and then pre the X on every two seconds, release M after the setting is completed key to save and exit (vibration prompt), the function of preing the MR key at this time is to copy the key preed just now: B interval 1 second A interval 2 seconds X.

Note: 1. The left M key only sets the programmable key of the left handle;

The right M key only sets the programmable keys of the right joystick.

2. Shut down and restart the handle to clear the macro programming of the setting

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.