Keytas For IPhone 7 Screen Replacement Kit Black 4.7" LCD

↑ Black ↑

↑ White ↑

• 【Compatible With】Black iPhone 7 4.7” ONLY, Not for iPhone 6s or 6 4.7 inch, please make sure you identify your iPhone correctly before purchase.
• 【High Quality Screen】 Each LCD is double tested strictly to ensure 100% in good condition before shipping and fast FBA delivery.
• 【Caution】This part does NOT include home button, front camera, cables for home button and front camera, earpiece speaker. Transfer them from old screen is a MUST.
• 【Bonus for You】Repair Tools Kit (Professional Set - 10pcs) + Screen Protector(High Quality Temper Glass+Cleaning Wipes+Dust Absorber) + Manuel Instruction.
• 【3 MONTHS WARRANTY! ! 】3 Months Warranty is guaranteed and please contact us directly if any product problems with replacing your screen is found. Your 100% satisfaction is our best impetus.

Product Description

Package Including:

• 1 x LCD Assembly for iPhone 7 (4.7 inch)
• 1 x Screen Protector(High Quality Temper Glass)
• 1 x Repair Tools Kit(Professional Set - 10 Pieces)
• 1 x Cleaning Wipes Set(2Cleaning Wipes+1Dust absorber)
• 1 x Manual Instruction

High Quality LCD Display Touch Screen Digitizer Assembly for iPhone 7 4.7inch.

Features:

✔Compatible with: iPhone 7 4.7 inch perfectly.

✔Savings: 2/3 the Cost saved Compared leaving it to be with or Repair Stores.

✔Recovery: A Look for your iPhone 7 4.7 inch with a DIY Screen Repair Tools Kit.

• 1. Screen Size: 4.7 inch
• 2. Display Type: Multi- Touch (IPS tech)
• 3. Outer Glass: Corning Gorilla Glass 3
• 4. Color: Black
• 5. Compatibility: For Black iPhone 7 4.7 inch

NOTES:

(1) It is best to watch the repair videos before install or find a professional to repair if you are not sure with replace

(2) The screws have long or short, please be carefully do not put the screw in the wrong place or it will damage the screen

(3) Remember to disassembly the battery connector

(4) please transfer the home button from your screen, only the orginal home button can make your touch ID work

(5) Do not forget to test the LCD. Avoid to pull the flex cable too hard

Trouble shooting:

We suggest look for a professional person to install the screen and test it before installing.

Q: I replaced the screen but it can’t turn on.

A: Reset the phone by pressing both Power and Home Button together for at least 15 secs.

Q: The touch is not working properly.

A: Power off your phone, clean the connector on the mainboard, reconnect all the cables, a hard reset of your phone, power on.

Q: There are colorful lines going down the screen.

A: Check the LCD to make sure the flex cables are good and there are no debris on the connectors. Then reconnect all the cables and leave the phone alone overnight in a dry environment and power on the phone in the morning.