Item 9~24V Motorcycle Led Multi~functional Engine Tachmometer For Time Water Tempertauture Stopwatch

100% NEW AND HIGH QUALITY

2 times full testing before pack,please feel free to purchase.

Description:5-in-1 motorcycle cool smart

Input:9-24V

Material:PC

Function:(Maxium engine speed is 19999R/Min)

time(12 hour system and 24 hour system)

temperature

water temperature

voltage

stopwatch(maxium 1999 seconds)

Power wire length:80cm

Induction yellow wire length:100cm

Water temperature r wire length:130cm

Product standard include:1 meter+2 ties+2 screws+1 manual

2 Installation ways:handlebar/dasard panel

Characteristic Setting:Without any operation, double cliSET can enter the timer interface,timer 12 hour system and 24 hour system can be switched freely, battery low voltage alarm and low voltage custom Settings, high temperature alarm and high temperature custom Setting, automatic fault prompt.Touch the setting key, high-end atmosphere grade.

Excellent Performance:rich color, high ligence, accurate engine speed monitoring, low delay, can customize the maximum speed and automatically record the maximum speed, time error of 10 millionths of a second, waterproof grade is high and not afr of any bad weather, temperature measurement error of 1%, voltage monitoring data is accurate. No matter what function you are using, as as there is an alarm, it will automatically switch to the alarm interface, and the alarm indicator fes at high frequency, which truly reflects the high level of ligence of the product.

4-in-1 temperature/water temperature meter wiring method:

Three wires:red、white and blue.Red is connecting to +, white is connecting to -, and blue is connecting to the main switch. The positive and negative poles should be in power always to ensure that the time will not stop. The blue wire is a on and off screen control wire, which is controlled by the main swith.If it is water temperature, you only need to acce the special water temperature r.

5-in-1 temperature/water temperature wiring method:

4 wire: red, white, blue and yellow.Red wire is connecting to +, white wire is connecting to -, blue wire is connecting to the main switch, yellow wire is the engine speed r cable, wrapped around the spark plug line 10 laps, fix yellow wire and close to the engine. The positive and negative terminals should be in power always to ensure that the time will not stop. The blue wire is a on and off screen control wire, which is controlled by the door lock. If it is for water temperature, water temperature r needs to be connected.

Fault Warning Code

The open-circuit warning code of the temperature r is Er1. The temperature r short-circuit indicates that the error code is Er2. When the battery voltage is lower than 9V, the UoL fault is indicated .The default factory low voltage alarm value is 11.5V, high water temperature alarm value is 75℃.

Function setting please chethe details on photo or read our manual before install the product.