IDM01, Oscilloscope Differential Isolation Module, Voltage Protection, 800V Safe

LOTO Differential Isolation Module IDM01

The module IDM01 is an active probe that could isolate differential input. Its input interface is BNC and output interface is VGA with flat wire.The input signal and output signal are totally isolated, and the input is differential.IDM01 could be used on every LOTO oscilloscope. When plugging IDM01 to LOTO scope by the VGA interfaces, the B of oscilloscope will become isolated differential input.

Specification

IDM01 is single-ed, there are 4 measuring ranges: ±20V，±80V，±200V and 800V.If you need to customize measuring range, for example, if you need to measure millivolt, we provide customization, please call +86 129982700.IDM01 has bandwidth of K Hz.If you need higher bandwidth, please choose:IDM02, 100KHz bandwidth;IDM03, 300KHz bandwidth.

When and Where to Use it？

IDM01 aims at the following probl:1, need to measure high voltage, but worried about damaging computer and oscilloscope.2, the tested circuit is not grounded, can’t make sure if connecting scope’s ground to tested ground is safe, scope’s ground and tested ground is not even.3,if the tested point has high common mode voltage, it would exceed the oscilloscope’s measuring range without differential input.4,when the tested signal is differential, and there is no ground lead.

No need to buy additional Probe

IDM01 is as above picture shows, full plastic housing provides safe insulation in case of accidentally operation errors. The price only include the IDM01 its, no other acceories are included. If you have already bought any LOTO oscilloscope, the X1/X10 probes in box could be used with IDM01, no additional probes needed, as the following picture shows.

Alligator clip Compatible

As following picture shows, you can use the wire with alligator clip on IDM01. Be careful not to touch metal part with bare hand, operate with caution.

High Voltage Probe, Available to Buy Separately

Users could buy the high voltage probe separately, which has better insulation and protection. Use with more ease. Purchase link:

DE-15 Interface, Easy Connection

IDM01 plugs to LOTO oscilloscope by the DE-15 interface, which we usually call VGA, as the following picture shows.

More Choices for you

There are 2 more types for your to choose from

IDM02，100KHz Bandwidth

IDM02 is the same with IDM01, but has higher bandwidth of 100KHz

IDM03, 300KHz Bandwidth

IDM03 is the same with IDM01, but has higher bandwidth of 300KHz

Video Demonstration and Instruction

This video demonstrates how to test 220V commercial power supply with IDM01 and 100:1 probe.https://www.bilibili.com/video/av68337909/

FAQ

Q: Is IDM01 compatible to all LOTO oscilloscope

A: Yes, IDM01 could be used with any LOTO oscilloscope.

Q: Can I use it to test commercial power supply?

A: Yes, with IDM01, you can test commercial power and voltage up to 800V without worry about damaging scope and computer.

Q: Can IDM01 be used alone? And how many s does it have.

A: The IDM01 could only be used with LOTO oscilloscope and IDM01 has 1 .

Recommended

More options for you

Please feel free to contact LOTO Oscilloscope Customer Service for anything we can do.We will responde as soon as poible.