IDE to Sata Data Adapter Card, Parallel Port to Serial Port

Detailed Information About The Product:

1.SATA1: SATA motherboard-IDE device (that is, the hard disk of IDE is used on the motherboard of SATA, please connect of SATA to the SATA1 interface, plug the IDE port of converter into the hard disk IDE, before using, please set the jumper of IDE device as MASTER)
2.SATA2: IDE motherboard -SATA device (SATA's hard disk is used on the IDE motherboard, SATA's data cable is connected to SATA2, the converter'S IDE is plugged into the motherboard IDE.
3.IDE interface devices (such as hard disk, optical drive, etc.) into SATA interface or SATA interface devices into the IDE interface, so that you can connect to the SATA interface on the motherboard, improve the utilization of system resources. Can support DVD, DVD-RAM, MO, CD-ROM, CD-RW, hard disk.
4.Support SATA 100/133 hard disk, ATA 100/133 hard disk, compatible with SATA 1.0 standard, ATA 1.0 standard. 1.5Gbps(150 megabytes /s) transmission rate.
5.Note: The compatibility of the optical drive is worse than the compatibility of the hard disk. Instructions for use:
1. SATA hard disk for IDE-supported motherboard
2. Be sure to turn off the power of the host computer before operation;
3. Open the computer case and insert the IDE socket of the adapter card into the IDE socket of the computer motherboard (the motherboard of the IDE interface);
4. Connect one end of the equipped SATA data cable to the SATA2 socket of the adapter card, and one end to the SATA interface of the SATA device, and set the hard disk switch and jumper;
5. Connect the large end of the equipped power cord to the spare power cord of the chassis power supply, and the small end to the power socket pin of the adapter card (white socket, with 4 pins, pay attention to the direction not to be reversed). At the same time plug in the power cord of the SATA device;
6. After the connection is completed, the computer will boot into the BIOS for device detection. The host computer should be able to correctly identify the connected SATA device and start it for normal use.
Note: When using the motherboard's IDE interface, first connect the SATA data cable and power cable to the card, and then connect the card to the motherboard's IDE port. Prevent the card from shaking back and forth when inserting, and don't break the interface.
Colour: red
Material: PCB
Size: 5x4x0.25cm Package Contents:
1 * IDE to SATA two-way adapter card
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !