Humidity Temperature Controller Digital therm ometer Hygrome

Detailed Information About The Product:

Temperature function:1. Automatic recognition of working mode 2. Cooling 3. Heating 4. Temperature correction function; Humidity function:1. Automatic recognition of working mode 2. Dehumidifying 3. Humidifying 4. Humidity correction function
Remotely reading/setting of parameters ,Real-time reporting of temperature/humidity ,Relay enable function (enabled by default)
Set Parameter:1. Working Mode:The system automatically recognizes the working mode according to the starting/stopping temperature and the starting/stopping humidity.
2. How to set the starting/stopping temperature function?Hold press the "TM+"/ "TM-" bu tton for more than 3 seconds to enter the startup/stop temperature setting interface. The parameters can be changed by the "TM+" and "TM-" bu ttons. After the parameters are changed, wait for 6s and it will automatically save and exit.
3. How to set the starting/stopping humidity function?Hold press the "RH+"/"RH-" bu tton for more than 3 seconds to set the minimum/maximum value of humidity. The parameters can be changed by "RH+" and "RH-" bu ttons. After the parameters are changed, wait for 6s and it will automatically save and exit.
Model Number:XY-TR01
Style:Embedded
Max Measuring Temperature:50°C - 69°C
Display Size:1.9 Inches & Under
Theory:Temperature Controller
Display Type:Digital
Type:K
Usage:Industrial
Screw:1/4 inch
Power Type:Charger
Temperature range:-20 -60 Celsius
Humidity range:00% -100%RH
Control accuracy:0.1 Celsius, 0.1%RH
Detection probe:integrated sensor
Output type:relay output
Output capacity:maximum 10A
Usage:
Step 1:Connect sensor to controller
Step 2:Connect to power supply to controller
Step 3:Adjust Start Temperature,Stop temperature and Temperature Correction
Step 4:Adjust Start Humidity,Stop Humidity and Humidity Correction
Step 5:Enable relay output according requirement;
Step 6:Remove power supply
Step 7:Connect to load with power supply at relay output terminal if need at Step5
Step 8:Connect to power supply for controller again
Step 9:Test and working
colour:blue
Material:Plastic + metal
Size:57*60*20mm
Package Contents:
1 * Humidity and Temperature Controller with SHT20 Sensor Probe
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !