HOBBYEAGLE A3L V2 3Axis Airplane 3D AVCS Gyro Stabilizer For All RX Futaba SB

HOBBYEAGLE A3-L V2 3-Axis Airplane 3D Gyro Stabilizer For All RX Futaba SBUS RC Airplane





Features                           

3 Flight Modes: Normal, 3D AVCS and Gyro Off Mode.

Standard wing type, Delta-wing and V-tail.

Remote Master Gain.

Servo Frequencies: 50Hz/125Hz/250Hz

Separated gain adjustment for each flight mode.

Automatic stick centering.

HV (8.4V) operating voltage supported.

Futaba S.Bus / S.Bus 2 supported.

Easy to use, extremely well-suited to beginners.



Specifications

Input Voltage: 5 to 8.4V

Servo Travel: 1520 ± 500μs

Gyroscope: ± 2000dps

Operating Temp: -40 ℃ ~ 85 ℃

Size: 43 × 27mm

Weight: 11 g



Caution Notes

    Please confirm the 13-bit unique product series number (S/N) on the
bar code label when purchasing. This number can be verified at our
website and it is also required in the after-sale service, please keep
it securely!

    Before power on, put the aileron, elevator and rudder sticks in the
middle position. The controller needs to perform self-calibration and
stick centering after you plugging the battery, the LED will keep
blinking Blue rapidly for about 3 seconds while calibrating, just don't
move the plane and the sticks until the initialization is done.

    It's extremely ant to verify that the gyro reacts in the
correct direction before flight, or it could lead to losing control or
even crash during flight!

    You need to restart the gyro after changing the receiver type to make new setting take effect.

    Never use the delta-wing or V-tail mixing functions of your transmitter.

    The new A3 series supports a wide working voltage from 5 to 8.4V, HV receivers or servos can be used directly.

    The radio control models are not toys. The propellers rotate at high
speed and pose potential risk, please carry out debugging and flying in
open space far away from the crowd. The beginner should be directed by
someone experienced.



Package Included

1 x A3-L V2 Flight Controller

4 x Receiver Wire

2 x 3m Tape

1 x 16V EZ-Plug capacitor to help maintain a secure voltage level during flight

A3-L Setting Menu

When the controller is working, press and hold down the button for more
than 2 seconds which will allow you to enter the settings menu as all
settings are completed by the button. Please consult the manual for more
details.

Feature Comparison of A3 Series