HBridge Motor Driver Nmos with Emergency Brake 530V Motor

Detailed Information About The Product:

Features: 1. Using Two Half-Bridge Driver Chips + Low-Pass Internal Resistance 55v110a Nmos, the Motor Can Realize Forward and Reverse Rotation.
2. Two Pwm Inputs, the Duty Cycle Can Be Adjusted Within 0-99%, with Instant Braking Capability!
3. Working Voltage 5v-30v, Power Below 170w.
4. the Control is Extremely Simple and Convenient, Only 3 Input Lines are Needed to Control the Motor. Supports 5v and 3.3v Logic Input, Suitable for Direct Control of Io Ports of Various Types of Microcontrollers.
5. the Chip Has Built-In Dead Zone Hardware Control, Which Can Better Adapt to Frequent Commutation and Reduce the Loss of the Tube Itself. the Back of the Module is Tin-Plated, Allowing the Wires to Carry Greater Current.

Description:
1. Interface description:
VIN: positive pole of power supply;
GND: negative pole of power supply;
12V: 12V output port
MOT+, MOT-: motor output interface
EN: Enable terminal, active at low level
IN1: Logic input 1
IN2: Logic input 2
2. Instructions for use:
PWM speed control:
IN1=PWM pulse (0-99%); IN2=0; Forward rotation speed is adjustable;
IN1=0; IN2=PWM pulse (0-99%); reverse rotation speed is adjustable;
IN1=0; IN2=0; motor braking;
Tips: Each time the module is powered on, there needs to be a falling edge before the control terminal is set to 0, that is, it is first pulled high and then pulled low. It is recommended to use microcontroller control. Due to the bootstrap capacitor scheme, the PWM duty cycle cannot reach 100%, and the control terminal cannot be directly connected to 1.
(Different batches may have differences in product appearance, color, and printing, which do not affect use)
size: 38.8mm x 67.5mm
Material: PCB
colour: As shown

Package Contents:
1 x Motor Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !