Hantek 2 In 1 Handheld Digital Oscilloscope + Multimeter

This all-new handheld oscilloscope is really practical for use with a new generation of 2 in 1 multifunction tester: oscilloscope and multimeter. Its sampling rate is 250MSa/s and its bandwidth is 40MHz. Support multi-angle adjustment, ultra-low-, Type C interface, each 2 hours battery charge allows working one full day or standby two months. Output sine, square, triangle, trapezoidal and other waveforms output.



Features:

2-in-1 Oscilloscope + Multimeter: This multi-purpose oscilloscope owns 2 universal test instrument functions. Necessary helper for an engineer.

Intelligent Control: 5V/2A large current or USB port of ordinary computer can be charged, easy to use, very convenient and handy with AUTO one-key test.

Ultra-low Design: Type C interface, and standby for 2 months after every recharge of 2 hours with large capacity replaceable lithium batteries supply.

Universal Multimeter Function: Test voltage, current, resistance, diode, capacitance, continuity.

5V/2A Charger + Type C Cable: Type C + data transfer interface, can share the charger and data cable with your mobile phone.



Small In Size & Held In Single Hand: The 45 degree suspension bracket design provides you a work station anywhere anytime.

One Key Export Out & Quick Comparison: 2 groups of reference waveform + 6 groups of waveform storage, simple and effective.

Digital Voltmeter Function: Automatic frequency and amplitude measurement, convenient to use and it supports Chinese & English menu display.

With Cursor Measurement Function: Supports time and voltage manual measurement, and measure the required waveform accurately.

Color LCD Screen: Exquisite and smooth lines make the waveform clear and undistorted when magnify with minimalist keyboard design simplify operation.

Unibody Casing: Fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble.

Self Calibration Function: Free from level drift after long time unused.

Scan Code for Video Help Function: Scan code on back of machine to get help of online video help.



Specifications:

Bandwidth: 70MHz / 40MHz (Optional)

Battery Charger Plug Type: US / EU (Optional)

Supply: AC 110-240V 50/60Hz

Display: Full Color TFT LCD Display(320*240 pixels)

Channel: 2CH + DMM

Horizontal:

Sampling Rate Range: 250MSa/s(Single-channel), 125MSa/s(Dual-channel)

Waveform Interpolation: (sin x)/x

Record Length: Max. 6K when single-channel, 3K each channel when dual-channel

SEC/DIV Range: 5ns/div～500s/div 1, 2, 5 step-by-step

Vertical:

A/D Converter: 8-bit resolution,each channel sampled simultaneously

VOLTS/DIV Range 10mV/div～10V/divat input BNC

Bandwidth Limit, Typical: 20MHz

Low Frequency Response (-3db): ≤10Hz at BNC

Rise Time at BNC, Typical: ≤5ns

Vertical Gain Accuracy: ±3% for Normal or Average acquisition mode

Note: Bandwidth reduced to 6MHz when using a 1X probe.

Supply: 2 * Built-in 3.7V 2600mAh Battery

Product Size: 199 * 98 * 40mm / 7.8 * 3.9 * 1.6in

Product Weight: 640g / 22.6oz

Package Size: 25 * 19 * 10cm / 9.8 * 7.5 * 3.9in

Package Weight: Approx. 1314g / 46.4oz



Package List:

1 * 2-in-1 Oscilloscope

1 * Clip Probe

1 * Test Probe

1 * Adapter

1 * USB Cable

1 * Multimeter Probe

1 * Storage Bag
Model Hantek2C72 Hantek2C42 Oscilloscope Mode Bandwidth 70MHz 40MHz Channel 2CH+DMM Horizontal Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel) Waveform Interpolation (sin x)/x Record Length Max. 6K for single-channel; 3K samples per dual-channel SEC/DIV Range 5ns/div~500s/div 1, 2, 5 sequence Vertical A/D Converter 8-bit resolution,each channel sampled simultaneously VOLTS/DIV Range 10mV/div~10V/divat input BNC Bandwidth Limit, typical 20MHz Low Frequency Response (-3db) ≤10Hz at BNC Rise Time at BNC, typical ≤5ns Vertical Gain Accuracy ±3% for Normal or Average acquisition mode Note: Bandwidth reduced to 6MHz when using a 1X probe. Acquisition Acquisition Modes Normal Trigger Type Edge Mode Auto, Normal, single Level ±4 divisions from center of screen Trigger Level Accuracy 0.2div × volts/div within ±4 divisions from center of screen Slope Rising, Falling, Rising & Falling Source CH1/CH2 Input Coupling , AC or GND Input Impedance, 25pF±3 pF, 1MΩ±2% coupled Probe Attenuation 1X, 10X Supported Probe Attenuation Factors 1X, 10X, 100X, 1000X Maximum Input Voltage 150VRMS Measurement Cursor Voltage difference between cursors: △V Time difference between cursors: △T Automatic Measurements Frequency, Amplitude DMM Maximum Resolution 4000 Counts DMM Testing Modes Voltage,Current,Resistance,Capacitance,Diode &On-Off Maximum Input Voltage AC:600V, : 800V Maximum Input Current AC: 10A, :10A Input Impedance 10MΩ Measurement Term Range Accuracy Resolution Voltage 400.00mV ± (0.8% + 5) 100uV 4.000V 1mV 40.00V 10mV 400.0V 100mV 600.0V ± (1% + 2) 1V Overload protection: 400mV: 250V, other: 600Vrms. AC Voltage 4.000V ± (1.2% + 5) 1mV 40.00V 10mV 400.0V 100mV 600.0V ±(1.5% + 5) 1V Frequency: 40Hz~400Hz; Frequency of 400V and 600V: 40Hz~100Hz Current 40.00mA ± (1% + 2) 10uA 200.0mA ± (1.5% + 2) 100uA 4.000A ± (1.8% + 2) 1mA 10.00A ± (3% + 2) 10mA Overload protection: self restoring fuse: 200mA/250V, 4A and 10A range no fuse. AC Current 40.00mA ± (1.3% + 2) 10uA 400.0mA ± (1.8% + 2) 100uA 4.000A ± (2% + 3) 1mA 10.00A ± (3% + 5) 10mA Frequency: 40Hz~400Hz; self restoring fuse: 200mA/250V, 4A and 10A range no fuse. Resistance 400.0Ω ±(1% + 3) 0.1Ω 4.000KΩ ±(1.2% + 5) 1Ω 60.00KΩ 10Ω 400.0KΩ 100Ω 4.000MΩ 1KΩ 40.00MΩ ± (1.5%±3) 10KΩ Overload protection: 220Vrms Capacitance 40.00nF ±(3% + 5) 10pF 400.0nF 100pF 4.000uF 1nF 40.00uF 10nF 100.0uF 100nF Overload protection: 220Vrms Diode 0V~2.0V On-Off

Specifications

Key Features

• 2-in-1 Oscilloscope + Multimeter: This multi-purpose oscilloscope owns 2 universal test instrument functions. Necessary helper for an engineer.
• Intelligent Control: 5V/2A large current or USB port of ordinary computer can be charged, easy to use, very convenient and handy with AUTO one-key test.
• Ultra-low Design: Type C interface, and standby for 2 months after every recharge of 2 hours with large capacity replaceable lithium batteries supply.
• Universal Multimeter Function: Test voltage, current, resistance, diode, capacitance, continuity.
• 5V/2A Charger + Type C Cable: Type C + data transfer interface, can share the charger and data cable with your mobile phone.
• Small In Size & Held In Single Hand: The 45 degree suspension bracket design provides you a work station anywhere anytime.

What’s in the box

1 x 2-in-1 Oscilloscope,1 x Clip Probe,1 x Test Probe,1 x Adapter,1 x USB Cable,1 x Multimeter Probe,1 x Storage Bag Model

Specifications

• SKU: GE779IP37JZ1CNAFAMZ
• Product Line: Yomandy
• Model: N/A
• Production Country: China
• Size (L x W x H cm): 25.00×19.00×10.00
• Weight (kg): 1.3
• Color: naturla
• Main Material: N/A
• Shop Type: Jumia Mall

Verified Customer Feedback

This product has no ratings yet.