Hantek 1008C 8 Channels Automotive Diagnosis Equipment Car

Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus Diagnosis/Performer/Startup&Charge), USB 2.0 interface plug and play, and need no extra supply, Support tablet PC, Support WIN10/ WIN8/WIN7 etc. Free software upgrading constantly, higher cost performance, Support USBXI, easy to operate. 8 isolated channels oscilloscope, 2.4MSa/s real time sampling rate, 10mV/div to 5V/div high input sensitivity and large input range, 100kHz high bandwidth, small size, easy to carry. Dynamic cursor tracking, waveform record and replay function.



Features:

8 channels automotive diagnosis oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus Detection/Actuator/Start and Charge, etc).

Video help function provides the video help of automobile testing which can watch online.

The diagnostic results support the generation of diagnostic reports, printing with one click, screenshots and many other methods to save the data.

Support waveform recording, can be long time recording waveform. It can simulate camshaft and crankshaft signal.

Transmit signals through USB 2.0 interface plug and play, and no need extra supply.



Specifications:

Brand: Hantek

Model: 1008C

Function: Test the Car Engine Ignition

Analog Channel: 8

Bandwidth: 100kHz

Input Impedance: Resistance: 1MΩ

Input Sensitivity: 10mV/div to 5V/div

Input Coupling:

Resolution: 12 bits

Memory Depth: 4K

Max Input: 400V (+AC Peak)

Sampling Rate: 2.4MSa/s

Material: Plastic

Item Size: Approx. 225 * 185 * 45mm / 8.9 * 7.3 * 1.8in

Item Weight: Approx. 623g / 22.0oz

Package Size: Approx. 27.5 * 23.5 * 10cm / 10.8 * 9.3 * 3.9in

Package Weight: Approx. 1660g / 58.5oz
General Oscilloscope Model Hantek1008C Analog Channel 8 Input Impedance Resistance: 1MΩ Input Sensitivity 10mV/div to 5V/div Input Coupling Resolution 12 bits Memory Depth 4K Max. Input 400V (+AC Peak) Real-Time Sampling Rate 2.4MSa/s Time Base Range 1ns/div to 20000s/div(1-2-5sequences) Automotive Measurement Function Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition; Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position; CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus; Performer: Petrol/; Starter and circuits Time Base Precision ±50ppm Trigger Source CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8 Trigger Mode Edge X-Axis Input CH1 Y-Axis Input CH2 Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle Cursors Measurement Horizontal ,Vertical, Track, Auto Measure Modes Waveform Signal Process +,- , x,÷, FFT, Invert Voltage Range 10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1

Current Range

100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A)

FFT

Rectangular, Hanning, Hamming, Blackman Window

Math

Addition, subtraction, multiplication, division

Interface

USB 2.0(Full Speed)

No need extra supply

High pressure ignition probe

Only Hantek1008C

Programmable Signal Generator
Channel
8CH


Output Level
LVTTL


Frequency Range
0-250kHz





Note: Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.



Package List:

1 * Car Diagnostic Oscilloscope

1 * Auto High-Pressure Ignition Probe

8 * BNC to Crocodile Clip Test Line

1 * USB Line

1 * Storage Case

1 * Software CD with User Manual