H6 Phone Car HUD Holder Head Up Display 6 inch Bracket H6 HUD Bracket Phone

Thanks for purchase this Universal Smartphone holder. Please read the instructions carefully before use it.

UniversalSmartphone holder exploits the hardened organic  gla to preventscratch and project information onto the panel based onoptical reflection theorem. When pd on the center console, driversdon’tneed to bow to see because it will not blosight. Thus drivers couldpay more attention to the road conditions nearby. In the meanwhile, thedesign avoids the drivers observing the distant road conditions, whiches the information more visualized and thereby improvesthe driving safety.

Acceories:

Universal Smartphone holder- 1pc

nsparent reflection film-1pc

Blanon-sl mat-1pc

Clean cloth-1pc

User manual-1pc

Product detail information

1.Organic gla board

2.Display information

3.Universal Smartphone holder

4.Non-sl mat

5.Smartphone

Method of installation

1. Choose a appropriate p on the carinstrumentpanel, and stithe blanon-sl mat on the p you want, then putthe Universal Smartphone holder on the non-sl mat ( 4 ).

2. Tear off the protection film and protection paper card on the two side of organic gla board ( 1).

3. Stithe nsparent reflection film on the inside of the organic gla board ( 2).

Please note: the method of stireflection film is as below

a. Take off the baside（marked 1) of reflection film,then it to the inside of the gla board

b.Take off the protection film (marked 2) of the reflection film, then the information will display on marked 2 side.

4. Take off the protection film on the surface( 3),and put the phone on the surface of Universal Smartphone holder andadjusting the organic gla board to appropriate angle according toindividual visual angle.(usually visual angle is 45°)

Startingyour car ar opening the mobile APP and setting theproper  route (now most of the syst contain a reflectionmode).

Technical specifications

Support Maximum smartphone size: 6”

Product size: 150x95x20mm

Product weight:100g