GPS Digital Speedometer Universal Car Inclinometer Level Tilt Mete GPS HUD Car

Special Reminder:The working voltage of this product: 11V~18Vdc(12Vdc/200mA)This product is a dual system: After power on, select the language you are familiar with, and select OBD or GPS system. It will automatically enter the last selected system after 5 seconds of no operation.on and Port Function:1. Left Atmosphere Light: Changes with engine speed or vehicle speed (setting it can be selected)2. Power on: Long pre for 2 seconds to turn off, long pre again for 2 seconds to turn on.3. on: Short pre to switch the display on the left. Move to the option after entering the setting, and short pre to calibrate on the display interface of the inclinometer.4. on: Switch the display on the right, and move the option after entering the setting.5. M key: Short pre (pre once) to switch the display mode, and confirm the option after entering the setting menu. Long pre (pre and hold for 2 seconds) to enter the setting, after adjustment, long pre for 2 seconds to save and exit6. Right Atmosphere Light: Changes with engine speed or vehicle speed (setting it can be selected)7. Suction Cup Holder: Used for viewing gla.8. Sensitive Components: Automatically adjust the brightne according to the surrounding environment.9. OBD line interface.10. Alternate interface.11. Chais bracket.Inclinometer Calibration:After the meter is placed, short pre or on: You hear didi, calibration is complete.Display Function Abbreviations:ECT: Engine water temperatureVLT: Voltage displayFUE: source consumption displayRPM: Engine speedTIM: System timeMIN: Driving timeDIS: Driving distanceMAP: Inlet preureOIT: Oil temperatureA/F: Air-source ratioPSI: Turbine preureASL: AltitudeDIR: Driving directionTPS: ThrottleKM/L: Kilometers per literIAT: Intake temperatureCVT: Transmiion temperatureELD: Engine loadGPS: Number of the satellites are searchedEnter Setting Mode:Long pre the M key for 2 seconds to enter the setting it, short pre to select the menu, and short pre the M key to confirm. After adjustment, long pre the M key for 2 seconds to save and exit.Select the System Language: CN Simplified Chinese / TW Traditional Chinese / EN English, and other languages.System Sound Setting: ON Turn on the alarm sound / OFF Turn off the alarm sound.Speeding Reminder: Alarm when the vehicle speed reaches the set default value of 150KM/h. The setting range is 5-200km/h.Engine Temperature Alarm: Alarm when the water temperature reaches the set default value of 120°C. The setting range is 50-200.Engine Speed Alarm: Alarm when the speed reaches the set default value of 6000r/min. The setting range is 1000-8000.Voltage Alarm Setting: Alarm when the voltage is lower than the set default value of 10.5v. the setting range is 10.0-15.0v.Speed Error Adjustment: Adjust the parameter value when there is an error between the speed and the instrument panel.(For example, the meter displays 100 Km/h, and the device displays 105 Km/h. Turn the dial on the dial to adjust the parameter value to 102)Speed Reset Setting: When the vehicle speed does not return to 0 after the car is turned off.(if the vehicle speed shows 5Km/h, the equment is adjusted to 6Km/h)Voltage Error Adjustment: When there is an error between the voltage and the instrument panel voltage. Fine adjustment can be made.(If the device displays 0.2V higher than the instrument voltage, the device is adjusted to 98%)Engine Displacement Setting: When the source consumption error is large, adjust according to the displacement.(if the car displacement is 3.6L, adjust the parameter value to 3.6L)Source Consumption Data Adjustment: Fine-tuning when there is an error in source consumption.(if the device displays 0.2L higher than the instrument voltage, the device is adjusted to 98%)Backlight Brightne Setting: Auto automatic light sensitivity. 1 is the darkest, and 8 is the brightest.Ambient Light Setting: RPM speed control color-changing ambient light SPEED speed control color-changing ambient light.OFF: off ambient light; BLUE: blue ambient light; RED: red ambient light; PURPLE: purple ambient light.Temperature Unit Setting: °C is Celsius °, F is Fahrenheit.Speed Unit Setting: Km/h kilometers MPH miles.Statistical Mileage Adjustment: Synchronization of total mileage.(for example, the total odometer on the dasard shows that you have driven 30010km, adjust the parameter value to 30010km).Shutdown Delay Setting: The default is 10 seconds to shut down, the adjustment range is 5-300 seconds.Shutdown Voltage Setting: Adjust to 13.2V or 13.6 when unable to shut down, adjust to COM mode for cars that start and stop automatically.System Time Adjustment: It can be adjusted to , the default time is China time (GMT+8)Restore factory settings: The system restores to the factory preset values. After selecting this operation, short pre the M key to confirm.Performance Testing:Acceleration Test: 100km acceleration refers to the acceleration time from 0 to 100km/h, which is a power test of the car.Brake test: The time and distance used after the brake is stopped at a speed of more than 100km/h is a brake performance test.Troubleshooting Settings:Scan fault Code: Scan whether the car is faulty, and display fault information.Clear Fault Code: When the car has a fault code display, short pre the M key to clear the fault code.Read Data Stream: Display all data in the car engine.Remind Warning:Please disconnect it if you don’t drive for more than a week. Because the OBD device is a normal electric car battery theoretically standby for 1 month. It is recommended to unplug the OBD device when the car is not used for a long time due to different vehicle conditions.OBD2 FA. Nothing on the screen, no powerCheck whether the OBD cable is tightly connected, unplug it, and plug it in repeatedly several times. If it still does not display, it is recommended to change the car to test, and analyze whether the car OBD diagnosis interface is broken. If the OBD diagnosis is broken, it is recommended to repair the OBD interface. Connect the machine again.2. It has been powered on, but the screen only displays the voltage, and it will automatically turn off after 30 seconds.HUD products are only applicable to OBDII and EOBD.Year of Car Production (OBDII and EOBD were used only after 2008).HUD products do not support OBD I and JOBD, cars produced before 2008.Please switch to the GPS system for display, and pre the on within 5 seconds to select the GPS system.3. There is an error between the vehicle speed and the dasard displayPlease check whether the unit is correct. Kilometer KM/mile MPH (reference setting item for speed unit switching).The speed unit is correct when booting up: long pre the M on for 2 seconds to enter the system settings, short pre to select the speed error adjustment for fine-tuning.(For example, the meter displays 100 Km/h, and the device displays 105 Km/h. Short pre the key to adjust the parameter value to 102).4. There is an error in source consumptionCheck the displacement of your vehicle, set the engine displacement in the system settings to the same displacement (for example, the car is 2.0L, and the parameter value is adjusted to 2.0L). If the displacement is the same, you can also fine-tune the source consumption data in the system settings (such as equment When the display voltage is higher than the instrument voltage is 0.2L, the device is adjusted to 98%) Suggestion: Since this data is the data of the tr computer, no fine adjustment is required.5. Cannot shut downAfter the car is turned off, the machine has a speed display and cannot be turned off. Select the shutdown voltage setting in the system settings and adjust it to 13.2V or 13.6V, and the car will automatically shut down after 3 minutes of turning off.6. Step on the brakes and wait for the traffic light to turn off the machine and automatically start and stop the car.Adjust the shutdown voltage setting in the system settings to COM mode.7. Extinguished while driving, the engine is off, and a hybrid car.1. Adjust the shutdown voltage setting in the system settings to COM mode.2 If it is not resoed, adjust the shutdown delay setting in the system settings to 300 seconds, and the car will shut down after 5 minutes.3. If it is not resoed, please switch to the GPS system for display, and pre the on to select the GPS system within 5 seconds of power-on.8. Wrong operation causes crashWhether the OBD2 interface uses other OBD equment (locator, tire preure monitoring, lock lift window folding ELM27).Modified and installed (central control navigation, electronic throttle accelerator, cruise at fixed speed, and computer system).The one-key startup, keyle entry, e startup) will cause crashes, unplug other OBD devices and use this product directly to restore factory settings (see the setting table for details).Long pre the M key to enter the setting menu, short key in the system setting menu to select restore factory settings, short pre M to confirm.If it is not resoed, please switch to the GPS system for display, and short pre the on for 5 seconds to select the GPS system.Inclinometer Calibration:After the meter is placed, short pre or on: You hear didi, calibration is completeGPS display FAQ:1. Nothing on the screen, no powerCheck whether the OBD cable is tightly connected, unplug it and plug it in several times, or directly plug it into the smoking with a USB cable.2. No speedGPS is in the state of searching satellites after power on, please move the car to an open road, GPS display above 5 means that it can be used normally after searching more than 5 satellites3. Can not automatically turn on or turn off repeatedly during drivingIf you use the OBD cable, enter the setting menu to select the shutdown voltage setting, and adjust the parameter value voltage to 13.0V or 12.8v4. Satellite time is not accurateEnter the setting item: system time adjustment, the short key to adjust time zone time, after adjustment, long pre M key for 2 seconds to save and exit.5. Inaccurate speedCheck whether the unit is correct, kilometers KM/mile MPH, (speed unit switch reference setting item).When the car leaves the factory, the manufacturer increases the speed displayed on the dasard by 5-7%. International standards are based on satellite data.Fine-tune the vehicle speed, if the meter displays 100 Km/h, the machine displays 105 Km/h, adjust the parameter value to 102.6. Wrong display of driving directionWhen there is no speed, the satellite cannot distinguish your driving direction, and it can display normally after the speed exceeds 5KM/H.7. The speed is still displayed after the car stopsUnderground parking lots, tunnels, and flyovers will make the signal unstable when there are obstructions. The satellites will drift. Please drive the car to an open road. If the number of satellites found is more than 5, it will be displayed as normal.8. After the car is turned off, it will not automatically shut downWhen the OBD cable is connected, the machine will automatically shut down after 3 minutes.If the machine has not shut down after 5 minutes after stopping the flame, adjust the parameter value of the shutdown voltage setting of the setting item to 13.5V.Specification:Screen size: about 3.5inProduct size: about 82*115mm/3.23*4.53inPacking box size: about 13.3x9x11cm/5.24*3.54*4.33inPackage weight: about 310gPacking List:1x Host1x OBD Line1x USB Cable1x Small Suction Cup Bracket1x Manual1x Double-sided TapeNote:Due to the lighting effects and shooting angles, there are color differences in the product, please understand.Due to manual measurement, there is a tolerance in the product size.About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.