Good Test For Android Smart TV Motherboard S368LA1.5

Please read our instructions carefully

Description: 512-4 is the running memory 512 storage 4G

1G+8G is running 1G storage 8G

Our acceories include: 1 motherboard, 1 wifi , 1 remote control   Basic acceories   Free key board

Please note that the motherboard supports the use of the digital keys of the remote control to switch the resolution, and there is no need to burn the firmware.

Please note that the motherboard supports the use of the digital keys of the remote control to switch the resolution, and there is no need to burn the firmware.

Please note that the motherboard supports the use of the digital keys of the remote control to switch the resolution, and there is no need to burn the firmware.

Recently, many friends bought it directly without contacting us. We're not sure if you can use it normally

We suest you consult me before buying,

You should make sure that you have general acceories and we have firmware that can support your screen, so that you can use it normally. I don't want us to have a dispute. Thank you very much for coming

1920*1080

1366*768

1440*900

1680*1050

1280*800

1024*768

The motherboard does not support-C,-T and-T2. Please note that it is not supported.

If you need the firmware of the motherboard, please send

it to me by email. Whether it is purchased by me or not,

you can consult us. My email is: 6203419@qq.com

lutx168@gmail.com

Instructions for mainboard

1 Please note that the voltage and current required by our motherboard products are 12v-3a or 4A or 5A

If you have an LED backlight or a screen 3A lower than 17 inches is enough to drive. If you have an old LCD screen, it is recommended that the current is 4A and 5A. Please do not plug in 12V 1A 1.5A 2A. They can't bring the motherboard, which is easy to cause damage to the motherboard. Please note that.

2  2 before the motherboard is powered on, please pay attention to insulating the motherboard

3 Please note that our definition ofDS interface is the interface of general series motherboard, which is not applicable to some DS interfaces.DS definition is marked on the back, please watch carefully

4. The default screen voltage of the motherboard is in the upper left corner. You can switch 12V 5V 3.3V by jumping

Please pay attention to the selection of screen voltage. The wrong selection of 12V 3.3V 5V may damage the motherboard or screen. Please pay attention.

5 please note that the screen cable cannot be inserted reversely, and the reverse power supply is easy to cause damage to the motherboard.Normal VCC represents power supply. If you use generalDS, the red line represents power supply.

6  The motherboard now supports remote control Qi The resolution can be switched through several digital ons on the remote control.

The specific operation method is as follows: when you receive the motherboard, the default resolution of our new motherboard is 1920 * 1080

The first boot time is very long. The first power on is in red standby mode. Please use the key board or the remote control to power on, the indicator light turns green, and then wait for the motherboard to enter the system. It is slow to enter the system for the first time, which takes about 90 seconds. Please do not operate in 90 seconds. Ar 90 seconds, use the remote control to pre the signal source of the remote control plus code to switch the resolution

Factory mode: signal source plus 208

Signal source plus 208 if your screen watermark flower screen: please modify panel-lvds ti

It can also be adjusted to the screen: Please note that the modified screen needs to be restarted to have effect.

When your screen is flowery, please refer to thi

First Open the signal source (input) interface, and then pre 208(recommended interval of half a second)

Pre the on and the light will turn red. Enter the factory menu and make sure the on flashes 4 times.

If you make a mistake or make a mistake, pre the back on or home on in the remote control and pre input 208.1 again.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.