Godox CT-16 Transmitter Receiver Kit 16 Channels Universal Wireless Flash Trigger for Canon Nikon Fujifilm Speedlite Flash

Don't fit ForSony Godox CT-16 Kit With Transmitter Receiver 16 Channels Universal Wirele Flash Trigger for Canon Nikon Fujifilm Speedlite Flash Introduction: The e trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wirele e control. The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wirele signal. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface. Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/250sec. All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance. Features - Universal hot shoe interface - 433MHz transmit frequency secures fast response and stable transmiion - 16 channels, transmitting distance up to 30m, no limits with directions or angles - Maximum synchronous speed up to 1/250 second - With studio flash interface, can wirelely trigger several kinds of studio flashes - Speedy frequency regulation, convenient for photographers to shoot - Energy-saving design with 12V 23A battery for transmitter and two AAA batteries (not included) for receiver - Comes with a PC sync cord for cameras without hot shoe connections Note: This trigger does not support TTL function. Compatible with: For Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24; For Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX; For Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT; For Olympus FL-50, FL36; For Sigma EF-500 DG Super, EF-500 DG ST, EF-430; For Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AF44D, 333D; For Vivitar 285HV (Older Vivitar 285/283 works only with PC sync); Other flash models with a trigger voltage of 12V or lower; Work with flash units using universal hot shoe like for Nikon, for Sigma, for Olympus, for Pentax (except for SONY as they use a special hot shoe)

Specification

Model: CT-16 Channel: 16 Channels Transmit Frequency: 433MHz Transmitter Power: 12V 23A lithium battery (Not included) Receiver Power: 2 x 1.5V AAA Battery (Not included) Outdoor operation distance: max. 30m / 90feet (open area, no fraise) Indoor operation distance: max. 25m / 75feet Synchronous speed: Max. 1/250sec Transmitter Dimension: 60x42x30mm Receiver Dimension: 90x50x32mm Color: Black Material: Metal + Plastic Operation How to use: Insert the transmitter's hot shoe socket into your camera's hot shoe jack, plug the flash onto the receiver, and switch ON the receiver. Make sure the channel selector of both transmitter and receiver at same channel. Pre the Test on on the transmitter to test before shooting. If your camera does not have hot shoe socket for connecting the transmitter you can connect the transmitter to the camera by the PC Sync Cord provided. (Only the old camera needed). You can trigger both the flash and studio lights with this flash trigger. If you use the receiver on big studio strobe flashlight or AC flash, you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord (not included). Package Listing CT-16 1 xCT-16 Transmitter 1 x CT-16 Receiver 1 x Sync Cable 1 x Convert Adapter 1 x User Manual Package Listing 1xT add 2x R 1 xCT-16 Transmitter 2 x CT-16 Receiver 2 x Sync Cable 2 x Convert Adapter 1 x User Manual Package Listing 1xT add 3x R 1 xCT-16 Transmitter 3 x CT-16 Receiver 3 x Sync Cable 3 x Convert Adapter 1 x User Manual Note: Don't include other products

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.