GERMA 433mhz RF Relay Receiver Module Wireless 4 CH Output With Learning Button and 433 Mhz RF e Controls Transmitter Diy

Description:

This Product included two small gadgets, including a e Control Transmitter and e Control Relay Receiver Module, which is a entire transmitting and receiving e control system. And comes with ultra-strong function and bring you much convenience in your daily life. It support ely and wirelely control your Garage Door, Electronic Gates, Electrical Appliances and other telecommand equipment within 50m (free space). Bringing you brand new experience of e control, you can not mi it.

Features:

*The transmitter supports Learning Code(1527) Common , such as, PT1527, EV1527, etc. Compatible with the most of 1527 e Control Relay Receiver Panel. *Stable circuit, high accurate and high-effective, individuation and humanization design, bringing you much convenient. *Adopts ed high-frequency triode, owning 10mW Transmitting Power. *Easy to use: Easy to install and use, the 4 channel e control system lets you take control of your gadgets, car and home or garage. *Widely Use: Perfect Suitable for controlling electrically operated gate, retractable door, garage door, electric curtain automobile, motorcycle and other telecommand equipments.

Technical Data Of Transmitter:

Model Number: KT02-117S-4. Materials: ABS. Product Type:Learning Code (1527) e Control Key Fob. RF Frequency: 433 MHz. Channel Supported: Four Channel. Buttons: Four Buttons. Encoding Type: Learning Code(1527), Fixed Code(2262). Modulation System: ASK. Transmiion Distance: 50m(Please notice that the 100m distance is the ideal distance without any block and signal interfere. It would rise and fall about 10%-50% with the block and signal interference). Color: Brown. Package Size: 6.8 * 3.5 * 1.5cm / 2.67 * 1.37 * 0.59in. Package Weight: 25g/0.88oz.

Note:

1.This e control transmitter only supports the learning code (1527) of the receiver 2.This e can not be programmed. 3.We don't offer retail package, but we will pack it well before shipped out.

Technical Data Of Receiver:

Model Number: RX480E-4. Working Voltage: DC 3.3~5V. Quiescent Current: ≤5mA. Receiver Sensitivity: -108dB. Receiver Distance: 15 meters above. Frequency Band: ±0.2MHz. Working Temperature : -25~75. Working Frequency: 433MHz (Others can be customized). Compatible Transmitter Encoding Type: EV1527. Working Mode: Point move, self-locking, interlocking. The Output: 4 channel CMOS level signal Corresponding to the e control ABCD 4 buttons.

Package:

Notice:

The package Included different products because you choose a Different options. Package 1: 1 PCS * RX480E-4 Receiveing Module Package 2: 1 PCS * KT02-4 EV1527 Learning Code e Control (Include Battery) Package 3: 1 PCS * RX480E-4 Receiveing Module 1 PCS * KT02-4 EV1527 Learning Code e Control (Include Battery)

[ Receiver modul e]P roduct Model: RX480-E4 Working Voltage : DC3.3~5V Quiescent Current : Le than5mA Working Frequency: 433MHz( Others can be customized ) Receive Sensitivity: -108dB Receive Distance:15 meters above Frequency band: ±0.2MHz Working Temperature : -25~75 Working mode: inching, self-locking, interlocking The output: 4 channel CMOSlevel signalCorresponding to the e control ABCD 4 buttons. note: Compatible transmitter encoding type: EV1527 If your transmitters are not using the encoding EV1527, they will not be connection to the receiver. Pins Instruction GND : ground or negative pole +V : DC3.3~5V input D0 : Data output D1 : Data output D2 : Data output D3 : Data output VT : LED and Learning button Output

How To Programming: 1. Delete existing data: Pre learning button 8 times. Response: LED flashes 7 times. 2. Learning e code: pre learning key once, twice or three times (see below). LED turns on: learning mode is active. Pre any button of the e control. LED indicator flashes three times: learning succefully completed. 3. Test: after the above operation , the receiver board can be controlled by the e control . More transmitters with different IDs can be learned and stored additionally, starting with step 2. A mixture of different modes is poible. Button usage (sets mode and starts pairing proce): Pre once ( the button on the receiver ) : Inching mode (Momentary Mode) Pre twice ( the button on the receiver ) : self-Lock Mode (Toggle-Mode of the 4 Channels) Pre three times ( the button on the receiver ) : interlocked mode (selected channel active and be cleared, if another channel becomes active) Application example

3486159670686576

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.