General Universal Treadmill Circuit Board Treadmill Motor Control Board Controller 1HP~4.0HP Treadmill Console Display

General Universal Treadmill Circuit board  Treadmill motor control board controller 1HP-4.0HP Treadmill Console display English version

Package include ：

Console x1Motor Controller x1Safety Key x1Cable x1

Specification ：

Very Easy install, if you have no idea how to install, please feel free to contact us.Console English VersionDefault MAX speed: 12km/h, can set to 16km/h by yoursAC85V ~ 255V powering input. Apply for DC motor 90V-260V ONLY!This controller set can work 100% without a speed r, so no need to worry.The controller of this kit with 3 pin, if your speed r ic with only 2 pin, connect 2 pin to 2 of 3pins of the controller is OK can !

Warranty：

1. The controller you will receive has already been d, with , new and with 90 days warranty.2. Free return or if board received:not as descrtion/different with real photo/not working/broken.

How to determine the failed controller

E01: communication fai, r fai;E02: you'd better test the motor first to check if there is any problem with motor, if motor work normal, then need to change controller.E03: r fault; treadmill will run few seconds then show E03;E04: usually over-current fault, this situation is generally ed components on the controller;

E07: Safety key problem（please put safety key on console ar powering otherwise will show E07

E08: May be lift motor control fault.

0.75-4.0HP with incline ↓

0.75-2.0HP with incline ↓

0.75-2.0HP with no incline ↓

Installation effect real photos as below ↓

Installation wiring diagram ↓

e sure the motor run normal by testing ：

Please e sure:a. Motor performance OKb. nsmit function OK, especially belt, lubrication normal.c. Only work for home treadmill DC motor.Please e sure that there is no problem with the motor before you p your order.The motor can be d by the method shown in the ture below. If the motor running smoothly by 2*5# battery, that means the motor is good. If running not smooth or do not run, it means motor broken.

Please e sure that there is no problem with the motor before you p your order.The motor can be d by the method shown in the ture below.If the motor running smoothly by 5# battery, that means the motor is good. If running not smoothly or do not running, it means the motor broken.

FAQ

A. How to set Max speed 16km/h?(defaut max speed 12km/h)

1. remove safety key2. pre"mode" on for 3 seconds until you see 1003. pre"start" on twice until you see 102, the number on the right side of 102 is the default max speed--124. pre speed+ to adjust the max speed, 16 max5. pre"start" on to save this setting6. put safety key on display--OK now.

B: how do I connect speed r?

No need speed r for this kit

C. is it poible to adjust the inclination? the inclination is not working.

YES, steps as below1. remove safety key2. pre"mode" on for 3 seconds until you see 1003. pre"start" on several times until you see 4. =10.1 stands for incline function, 10.5=10.0 no incline function5. pre speed +_ on to adjust 10.0/10.15. pre"start" on to save this setting6. put safety key on display--OK now.

SETTING

no. definition default range101 mininum speed 1.0 0.5-3.0102 max speed 12 3.0-16103 speed calibration 13.5 1.0-20.0104 / incline function 10.0 10.0(no incline)/10.1(incline) r 22.1107 twisting force 3.0 0.5-20.0PS: --21.9= with optical r 22.0=with ic r 22.1= with no r (this kit can work with no r)107--if treadmill speed too high or too low, need to adjust the twisting force.need to pre start on to save setting.PS: --21.9= with optical r 22.0=with ic r 22.1= with no r (this kit can work with no r)107--if treadmill speed too high or too low, need to adjust the twisting force.need to pre start on to save setting.

Terms1. TT2. 3. 4. PaymentFeedback ：Feedback is the breakfast for the champion.Your feedback is very improtant to our busine development and of how can we doing. We sincerely invite you to leave positive feedback for us service.If you are satsdfied with our products and services.