G7 HUD Automatic Car Head Up Display Speedometer Dial Over-speed Alarm Universal For Bike Motorcycle Projec

WYING G7 HUD Automatic Display Car Head Up Display Speedometer Dial Over-speed Alarm Universal For Bike Motorcycle Projec

Display functions:

1.Multi-function display:vehicle speed, number of s, vel distance

(Short pre the wave on vertically to change the function)

2.Over-speed alarm icon

3.Speed Unit:MPH-miles ,KM/H-kilometers

4.Compa:After the is found, it will stops fing and goes out before it can be used normally.(N-North S-South W-West E-East )

5. Icon

Packing

1x A7 Head Up Display

Speedometer

Applicable to all models

mini, large, claicG7 display function

Speed/Direction/Distance/Number of s

Display: Vehicle speed/Number of s/Driving distance

Speeding alarm icon

driving direction

MPH-mile KM/H-km

icon

Compact body suitable for pment

Any corner is clear and natural, without blocking any line of sight

Suction cup installation

Manufactured with heart,produced with ingenuity

Master-level design, ity, every inch is carefully manufactured, tough appearance, 2sides, 4 lines, 8 corners, 10 slots, split edgedesign, ing the machine more stylish

360 degree rotating suction cup bracket

Multi-function one-key switching

Speed/Compa/Driving Distance/Number of s

1.speed    2.compa   3.vel distance   4.Number of s+Beidou

Using 10 Hz high refresh rate + Beidou dual-mode chip, the refresh rate is 10 frames per second, and the speed of the car changes smoothly and coherently!

Profeional solution design es performance more powerful

High-performance proceing chip, super performance and compatibility, dual-running memory and dual-core proceor to ensure smooth high-speed operationUSB powered 0 power consumption

Turn off the car and completely cut off the power, and there is no electricity theft upgrade

Introduce Taiwan's lianyong technology solution, use core algorithm, add speed lubrication effect, nospeed jump, more coherent and smooth display

Compa

Humanized direction display, desert plains will not get lost

FAQ;

1.The screen without any display,and no power

Start the car engine;check if the cable line is tight;or connect the USB to the computer to check

2.Without car Speed

After HUD power-on, the will start to find the . Please drive the car to the road. It will work once gets more than 5 signals.

3. Cannot be turned on automatically or repeatedly extinguished during driving

Please use the USB cable to insert the arette

If you use the cable, change the sleep voltage to 13.0V or 12.8V

If use the USB cable, e the sleep voltage off.

4.Inaccurate time

Enter the setting it: system time adjustment, turn the dial to the right to adjust the time zone time, after adjusting, pre the dial vertically shortly for 2 seconds to save and exit

5.Speed is not correct

(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item)

(2) The car factory had increased speed(5-7%)than real for drivers’ safety, data is strictly follow the international standards

(3) Fine-tuning the vehicle speed, e.g. meter display 100 Km/h, machine display 105Km/h,default value 107-5=102

6.Driving direction display error

After the vehicle speed exceeds 5KM/H, the direction can be displayed normally.

7.Speed is still on display after the car stops

drift will be caused in underground parking,tunnel,overpa or blockers,please drive your car on open road,then this situation can be solved after the numbers >5

8.HUD cannot be automatically shut down after car stopped

(1) HUD can be shut down in 3 minutes(in mode)

(2) If not in 5 minutes,set item shutdown voltage to 13.5V or use the USB cable