Fully Assembled DIY Kit Oscilloscope Teaching DIY Digital

Adopts ARM - processor , and includes a 2.4-inch color TFT display screen
Used for secondary development on the basis of this kit, for example, it can be changed to millivoltmeter, data loggers
Come with instructions, easy to install and operate
Auto/normal/single trigger modes, easy to capture the moment waveform
Available rising or falling edge trigger Observable previous waveform trigger (negative delay)
Can freeze waveform display at any time (HOLD function)
Waveform parameter digital display, including frequency, period, , duty , MAX./MIN././-/virtual values
Short-circuit and open-circuit detection: Can help the find out the soldering error
TFT controller recognition function
The SMD has been soldered, more suitable for electronic beginners
Maximum real-time sampling rate: 1 /s
Analog bandwidth: 0 - 200 KHz
Sensitivity range: 5 - 20 mV/
Maximum input voltage: 50 Vpk (1X probe)
Input impedance: 1M ohms/20pF
Accuracy: 12 Record length: 1024 points
Coupling modes: DC / AC / GND
Time Base Range: 500s/ - 10us / Trigger modes: Auto, normal, and single
Trigger position: Center of buffer
Supply voltage: DC 9 V (8 - 10 V)
Current consumption: ~120 mA @ 9 V
Main board size: 94 x 65 mm (3.7 x 2.56 in)
Analog board size: 65 x 47 mm (2.56 x 1.85 in)
Screen size: 52 x 40 mm (2 x 1.57 in)
Colour:White
Material:ABS
Different batches, the product may have color difference, does not affect Package Contents:
1 x oscilloscope
1 x BNC probe Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.