FT232RNL Industrial Digital Isolated USB Convert

1. The FT232RNL chip is adopted, and high-speed communication is stable, and compatible. Support multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
2. The on-board self- fuse and protection diode can the stable output of current and voltage, prevent over-current and over-voltage, and the impact resistance
3. On-board automatic transceiver conversion circuit ensures fast and stable communication between USB terminal and different interfaces without interference. Onboard TTL serial port 3.3V and 5V level conversion circuit, users can switch TTL communication level through switch
Product type: industrial digital isolated converter; USB interface: Working level: 5V; Interface type: USB-B interface; Interface protection: 200mA self- fuse, isolated output; RS232 interface: Interface type: DB9 male; Interface protection: tube protection, surge and static protection; Transmission mode: point-to-point; Communication rate: 300bps~3Mbps
RS485/422 interface: Interface type: terminal block; Direction control: the hardware automatically determines and controls the data transmission direction; Interface protection: 600W -protection, surge and 15KV static protection (leave two 120R balance resistance jumper caps to enable)

Transmission mode: point-to-many (485 mode can connect up to 32 nodes, and repeaters are recommended for more than 16 nodes; 422 mode can connect up to 256 nodes, and repeaters are recommended for more than 16 nodes)
Communication rate: 300bps~3Mbps
TTL (UART) interface:
Working level: 3.3V/5V
Interface type: terminal block
Interface pins: TXD, RXD, GND, 5V/3.3V
Interface protection: clamping protection diode is provided to prevent overvoltage and negative pressure and impact interference
Transmission mode: point-to-point
Communication rate: 300 ~3Mbps
indicator light:
PWR: power indicator, connected to USB, red light when voltage is detected
TXD: send indicator light, when data is sent from USB port
RXD: receiving indicator light, which is on when data is sent back from the device interface
Use environment:
Temperature range: - 15~70 ℃
Humidity range: 5%~95% RH
: , Linux, Android, Windows 11/10/8.1/8/7
Product size: 84.3 x 78 x 24.3mm
color:Black
Material:ABS+metal

Package Contents:
1 x USB TO RS232/485/422/TTL converter
1 x Guide rail clip
1 x USB cable type A male to type B male about 1.2
1 x Screwdriver

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !