Free Sh RF-603 II RF603II Wireless e Flash Trigger Shutter Relase C1 for Canon Rebel T3 XS T5i T4i T3i T2i T1i XSi XTi XT

100% Brand New, Never used, High Quality, 1 Year Warranty, Fast Shping!

Free Shping! Yongnuo Upgraded RF603II RF-603 II Radio Wirele e Flash Trigger Shutter Relase Transceiver Transmitter Receiver C1 C3 N1 N3 for Canon Nikon Pentax FujiFilm Samsung Kodak etc. DSLR Digital SLR Camera

FSK 2.4GHz 100 Meters

Note: For this RF-603 II, we have four versions C1 C3 N1 N3, different version has different shutter release cable, you can choose the related cable to fit for your camera.

This listing is C1 Version

Introduction:

The upgraded RF-603 II, the manual Flash trigger and shutter release ( you can use those two functions simultaneity ), it adopts a global free FSK 2.4GHz wirele channel which can be suitable in many countries. RF-603 II with FSK system, can be more effective to guarantee speed, distance and stability. Within capacious areas, the e control distance may reach to 100m, and is suitable for the first generation RF-603. RF-603 II is improved version of RF-603, it is a e shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item. The 2.4GHz wirele frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the e control distance may reach to 100m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or le. A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. The pictures below just show one of the two sets.

Improved Features: 1. Hot shoe locking system to prevent from slping off 2. Switch on side for easy operation 3. Enhanced self-detecting system 4, Higher sync speed than the first generation The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or le, difference combination of models of flash and camera using may achieved difference flash sync speed). 5, Adding the Locking rings 6, Improved Flash / Shutter control ons 7, Working for more non Canon/Nikon cameras and single firing pin cameras ALL Standard Hot shoe DSLR Camera except for Sony and Minolta. Note: Canon cameras users choose RF-603 II Canon version, Nikon Camera users choose RF-603 II Nikon version, other cameras can choose any version. 8, Adding the power switch for single transmitter Set the power switch on TX (single transmit) or T R X (transmit-receive automatic switch) state according to different shooting requirement. When it used as wirele triggering transmitter and flash testing, set to "TX"; When it used as wirele triggering receiver, using shutter release or other extended functions, set to "T R X", set to OFF means turn off the power. 9, Suitable for first generation, you can use them together.

Main Functions:

1. Works as a wirele e shutter release control a), Auto focus, continuous shooting, long exposure, half-way preing, full-way preing is supported Depending on the camera model a special shutter release cable is included in the package b), Wirele e Shutter Release ( On camera )--- You can mount one receiver into the camera and connect it with the camera via the 2.5mm shutter connecting cable, and can e control the camera with other receiver. You can use it to fulfill the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Preing, Full-way Preing and Bulb. c), e Shutter Release ( off Camera )--- You can use the single receiver to fulfill the function of e shutter release after you connect it with your camera via the 2.5mm cable Note: This product can achieve wired /wirele e shutter release function, need to LS-2.5 series shutter connecting cable(or purchase) according to the different cameras. When using the shutter release, the power switch need to set in”T R X” state. 2. Wirele studio flash trigger b), To fire the Flash Speedlite --- one receiver can fire one flash speedlite, one set of RF-603 can control 2pcs Flash Speedlite at the same time. c), To fire the Studio Strobe light --- You need to purchase an extra 6.35mm cable, you can buy this cable from our store. 3, You can use ABOVE TWO FUNCTIONS simultaneousty 4, The RF-603 II Nikon version and Canon version can be used together If your have 2sets RF-603 but you lost one receiver for Canon version, it's no need to buy other receiver, you can use the Nikon receiver and Canon transmitter together. ( Note: the hot shoe of transmitter should be compatible with the hot shoe of camera when you use them together. )

Specifications:

Type: FSK 2.4GHz wirele e system Transmitter Distance: 100M Channel: 16 difference channels and All channels Release: Half-way pre, Full-way Pre Transmitter Port: PC Sync, standard PC socket for flash Speedlite or studio Strobe Receiver Port: PC Sync, 2.5mm Socket for shutter release Time of shooting: Up to 20000 times Battery Type: 2 x AAA batteries ( No batteries included) Receiver stand-by time: Up to 45 hours Dimensions: 37 x 30 x 81.5mm (W x H x D) (Appro.) Weight: 150g (Appro.)

Suitable for Camera Models: C1 fit for Canon EOS: 1100D / 1000D / 600D / 550D / 500D / 450D / 400D / 350D / 300D / 60D fit for Canon Rebel: T3 / XS / T5i / T4i / T3i / T2i / T1i / XSi / XTi / XT fit for Pentax: K20D / K200D / K10D / K100D / K110D fit for Samsung: GX-20 / GX-10 / GX-1L / GX-1S

Suitable for Flash Speedlite with "Sleep Mode" function: fit for Nikon: SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24 (Not fit SB600) fit for Canon: 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX fit for Pentax: AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT fit for Olympus: FL-50, FL36 fit for Sigma: EF-500 DG Super, EF-500 DG ST, EF-430 fit for Sunpak: Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AF44D, 333D fit for Vivitar: 285HV and other flash which has " Wake up " function

Package contains:

2 x Transceivers (1xTransmitter & 1xReceiver) ( No batteries included) 1 x 2.5mm port Shutter Release Cable ( C1 version ) Package

Shping methods:

USA sent by ePacket with tracking number, need about 2-3 weeks to USA (Free Shping!)

Other countries (except USA) sent by China Post Air Mail with tracking number, most countries need about 5-6 weeks, some far countries need 8 weeks (Free Shping!)

Shping term:

We sh to Worldwide.

We will sh the item to you within 3 busine days after clearance of payment.

Shment is directly from China Post via registered Airmail with Tracking Number.

It usually takes 10-20 busine days. Due to variation of postal service in different areas, some areas may take longer.

We accept or other Expre, if you need change the method of shment, please contact us in advance.

Payment:

We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.

Payment must be made within 3 days of order.

If you can't checkout immediately after auction close, please wait for a few minutes and retry Payment must be completed within 3 days.

Return and :

If the product you receive is not as described or low quality, we promise that you may return it before order completion (when you click ‘Confirm Order Received’ or exceed confirmation timeframe), the return item must in the packing, then you will receive a full , and the return shping fee will be paid by the seller, details of the shping method and fee payment should be agreed with the seller in advance. Or, you can choose to keep the product and choose a partial .

The buyer is responsible for the customs duties taxes.

Guarantee:

We provide one year warranty. ( The Batteries only have 3 months warranty)

Feedback:

We depend on our customer satisfaction to succeed, Therefore, your feedback is extremely ant to us. If you are satisfied with our service, please leave us a positive feedback.

Please contact us before leaving any negative or neutral feedback. We will soe the problem until you are fully satisfied.

We maintain high standards of excellence and strive for 100% customer satisfaction! Our goal is customer satisfaction!

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.