For Mercedes Benz C E S GLC W205 W213 V Class W447 Dynamic Blue LED Turn Signal Blinker Sequential Side Mirror Indicator Light

For Mercedes Benz C E S GLC W205 W213 V Class W447 Dynamic Blue LED Turn Signal Blinker Sequential Side Mirror Indicator Light

Compatibility:


For Benz




-For Benz C Class W205 New C180 C200 C250 C300 C350 C350e C400 C43 C63 Saloon & Coupe 2015-2018


-For Benz S Class W222 S400 S400L S450 S500 S500L S550 S550e S560 S600 S600L S63 S65 2014-2018


-For Benz GLC Class X253 GLC250 GLC300 GLC350e GLC63 2016-2018


-For Benz E Class W213 E200 E250 E300 E350 E400 E500 E550 E43 E63 2016-2018


- For Benz V Class W447 2014-2018






Package included: 2x Side Mirror Turn Signal Light( Left and Right).


 


 


Note:
The yellow turn signal is plug and play install, very easy and convenient.
For the blue light function, your first choice is to connect with the puddle light power if you have.
Or you connect with the side mirror flip power. 
If you don't have all these two function, then you have to open the door panel to connect with the positive to get power, it is a little bit complicated.
Anyway,  you can just use tape to pack it and let it be or cut the green wires off , use the yellow turn signal only.


 




MATERIAL: ABS


Light color: Blue/Yellow Dynamic Turn Signals


Long lifespan, More Safety, 100% Waterproof


Installation Instruction is NOT included.






Product Advantages:


Plug and play, No wiring, No coding!


Error free!


Dynamic sequential, much sport!


Brighter than original one!



Dynamic turn signal,scroll smoothly.Easier to be seen by other drivers when you are turning right/left.



1.Please check our pictures to ensure ours match with the wing mirror on your vehicle.


2.Please allow slight manual measurement deviation for the data.


 


 



For the blue light function,


1. Connect with the puddle light power. after the car is unlocked or locked, then dynamic blue light will be on for 5-15 seconds.


2. Connect with the side mirror flip power. after the car is unlocked, then dynamic blue light will be on for 5-15 seconds.


3. Open the door panel to connect with the positive to get power. after the car is unlocked or locked or the turn signal lamp is turned off, then dynamic blue light will be on for 5-15 seconds.


Anyway, you can just use tape to pack it and let it be or cut the wires off , use the yellow turn signal only.

There are three connection methods to achieve the dynamic blue effect, and different methods have different effects:

˃ Connect the positive pole of the puddle light power supply. after the car is unlocked or locked, then dynamic blue light will be on for 3-10 seconds.

˃ Connect the positive pole of the rearview mirror flip power supply. after the car is unlocked, then dynamic blue light will be on for 3-10 seconds.

˃ Open the door panel to connect with the positive power wire. after the car is unlocked or locked or the turn signal lamp is turned off, then dynamic blue light will be on for 3-10 seconds.

Anyway, you can just use tape to pack it and let it be or cut the wires off , use the yellow turn signal only.