This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomePhones & TabletsCell Phone AccessoriesReplacement Parts & ToolsFor Huawei Y6S 2019/Y6 2019/Y6 Prime 2019/Y6 Pro 2019 Back Cover Glass Rear Housing Door Replacement with Camera Lens Adhesive Sticker
/product/55/9541142/1.jpg?6038)
/product/55/9541142/2.jpg?6038)
/product/55/9541142/3.jpg?6038)
/product/55/9541142/4.jpg?6038)
/product/55/9541142/5.jpg?6038)
/product/55/9541142/6.jpg?6038)
/product/55/9541142/7.jpg?6038)
Share this product
Shipped from abroad
For Huawei Y6S 2019/Y6 2019/Y6 Prime 2019/Y6 Pro 2019 Back Cover Glass Rear Housing Door Replacement with Camera Lens Adhesive Sticker
GH₵ 371.10
GH₵ 570.7535%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 35.50 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 35.50
Ready for pickup between 10 October & 15 October when you order within next 16hrs 22mins
Door Delivery
Delivery Fees GH₵ 47.40
Ready for delivery between 10 October & 15 October when you order within next 16hrs 22mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
bling bling Ten Clock
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
--Protect your valuable investment from scratched and damage.
--It is used to Replace your broken, cracked, marked Back Door Cover.
--Make your Phone new like before.
Disassemble the back cover:
1. First, use a household hair dryer to the edge of the back cover for 1-2 minutes (some machines are relatively tight, can not be opened and continue to , do not worry about burning the phone)
2. Second, press the back cover with the suction cup, slowly open a slit with force, insert the disassembled piece into the gap, and then slowly open it to open it. ((The suction cup should be tight, the suction is not enough to add some water)
Install the back cover:
1. First, after disassembling the back cover, it is necessary to clean the glue around the middle frame, first buckle it clean, wipe with , if not, wipe it with a wet towel. In short, there must be no residue, otherwise there will be any foreign matter. Lead to degumming later.
2. After cleaning, tear off all the green adhesive protective film on the back of the new back cover, and align it to ensure that it is stuck in one place. It can not be disassembled and reassembled twice, which will affect the viscosity of the glue. Once installed, the back cover will be pressed around for a while.
--It is used to Replace your broken, cracked, marked Back Door Cover.
--Make your Phone new like before.
Disassemble the back cover:
1. First, use a household hair dryer to the edge of the back cover for 1-2 minutes (some machines are relatively tight, can not be opened and continue to , do not worry about burning the phone)
2. Second, press the back cover with the suction cup, slowly open a slit with force, insert the disassembled piece into the gap, and then slowly open it to open it. ((The suction cup should be tight, the suction is not enough to add some water)
Install the back cover:
1. First, after disassembling the back cover, it is necessary to clean the glue around the middle frame, first buckle it clean, wipe with , if not, wipe it with a wet towel. In short, there must be no residue, otherwise there will be any foreign matter. Lead to degumming later.
2. After cleaning, tear off all the green adhesive protective film on the back of the new back cover, and align it to ensure that it is stuck in one place. It can not be disassembled and reassembled twice, which will affect the viscosity of the glue. Once installed, the back cover will be pressed around for a while.
Specifications
Key Features
--Protect your valuable investment from scratched and damage.
--It is used to Replace your broken, cracked, marked Back Door Cover.
--Make your Phone new like before.
Disassemble the back cover:
1. First, use a household hair dryer to the edge of the back cover for 1-2 minutes (some machines are relatively tight, can not be opened and continue to , do not worry about burning the phone)
2. Second, press the back cover with the suction cup, slowly open a slit with force, insert the disassembled piece into the gap, and then slowly open it to open it. ((The suction cup should be tight, the suction is not enough to add some water)
Install the back cover:
1. First, after disassembling the back cover, it is necessary to clean the glue around the middle frame, first buckle it clean, wipe with , if not, wipe it with a wet towel. In short, there must be no residue, otherwise there will be any foreign matter. Lead to degumming later.
2. After cleaning, tear off all the green adhesive protective film on the back of the new back cover, and align it to ensure that it is stuck in one place. It can not be disassembled and reassembled twice, which will affect the viscosity of the glue. Once installed, the back cover will be pressed around for a while.
--It is used to Replace your broken, cracked, marked Back Door Cover.
--Make your Phone new like before.
Disassemble the back cover:
1. First, use a household hair dryer to the edge of the back cover for 1-2 minutes (some machines are relatively tight, can not be opened and continue to , do not worry about burning the phone)
2. Second, press the back cover with the suction cup, slowly open a slit with force, insert the disassembled piece into the gap, and then slowly open it to open it. ((The suction cup should be tight, the suction is not enough to add some water)
Install the back cover:
1. First, after disassembling the back cover, it is necessary to clean the glue around the middle frame, first buckle it clean, wipe with , if not, wipe it with a wet towel. In short, there must be no residue, otherwise there will be any foreign matter. Lead to degumming later.
2. After cleaning, tear off all the green adhesive protective film on the back of the new back cover, and align it to ensure that it is stuck in one place. It can not be disassembled and reassembled twice, which will affect the viscosity of the glue. Once installed, the back cover will be pressed around for a while.
What’s in the box
1x packages
Specifications
- SKU: GE779EA48DZGINAFAMZ
- Model: X-sjpj-7-23-5699
- Production Country: China
- Size (L x W x H cm): 20x10x20
- Weight (kg): 0.2
- Color: Y6 Pro 2019 Blue,With hole
- Main Material: other
Verified Customer Feedback
This product has no ratings yet.
/product/55/9541142/1.jpg?6038)
For Huawei Y6S 2019/Y6 2019/Y6 Prime 2019/Y6 Pro 2019 Back Cover Glass Rear Housing Door Replacement with Camera Lens Adhesive Sticker
GH₵ 371.10
GH₵ 570.7535%
Questions about this product?
