For HackRF One 1MHz6GHz Open Source Software Sdr Developme

for HackRF Is A Software Defined Radio Peripheral Capable Of Transmitting Or Receiving Radio Signals From 1mhz To 6ghz. for HackRF Is An Open-Source Hardware Platform That Can Be Used As A Usb Peripheral Or Programmed For Stand-Alone Operation, Designed For Testing And Developing Modern And below-Generation Radio Technologies.
8-Bit Sample Quadrature (8-Bit I And 8-Bit Q); Compatible With for GNU Radio, SDR #, And More; Software Configurable Rx And Tx Gain Filters And Baseband;
Software Control Power Supply Antenna Port (50ma At 3.3 V); SMA Female Antenna Connector; Sma Female Clock Input And Output Synchronization;
Convenient Programming on; Pin Header For Internal Expansion; Operating Frequency From 1mhz To 6GHZ; Transceiver Half-Duplex; Up To 20 Million Samples Per Second; High-Speed USB 2.0; USB-Powered; Open Source Hardware;
note: Depending on the batch, the appearance, color, and printing of the product may vary, which does not affect use.

Description:
for HackRF One hardware mainly consists of the following parts
1. RFFC5072: The mixer provides local oscillator from 80MHz to 4200MHz
2. MAX2837: 2.3GHz to 2.7GHz wireless broadband RF transceiver
3. MAX5864: ADC/DAC, 22MHZ sampling rate 8bit
4. LPC4320/4330: ARM Cortex M4 processor clocked at 204MHZ
5. Si5351B: I2C programmable arbitrary CMOS clock generator, providing 40MHZ 50MHZ and sampling clock by 800MHz frequency division
6. MGA-81563:0.1-6GHz 3V14 dBm amplifier
7. SKY13317:20 MHZ-6.0 GHz RF single pole three throw (SP3T) switch
8. SKY13350: 0.01-6.0 GHz RF single pole double throw (SPDT) switch
Taking the receiving process as an example, the process after the signal enters from the antenna is as follows
1. The RF switch determines whether to amplify through a 14dB amplifier
2. High-pass or low-pass filter the signal through the image suppression filter
3. The signal is mixed by the RFFC5072 chip to a fixed intermediate frequency of 2.6GHz.
4. The latest firmware supports the option of variable IF
5. Intermediate frequency range 2.150GHz -2.750GHZ
6. The signal is sent to the MAX2837 chip and mixed to baseband, and a differential IQ signal is output.
size: about 12 x 7.5cm
Material: PCB
colour: green

Package Contents:
1 x SDR Development Board

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !