for AZDOME Car Record Hardwire Kit For AZDOME M550 GS63H PG17 Low Vol Protection Mini USB Port 12V-24V Mini Hardwire Kit

for AZDOME Car Record Hardwire Kit For AZDOME M550 GS63H PG17 Low Vol Protection Mini USB Port 12V-24V Mini Hardwire Kit

Specification:Material: ABSOutput voltage: 5VOutput current: 1A/1.5A/2.5AStandby power consumption: ≤ 0.01WLow Voltage Protection: 11.6VOutput interface: Mini  usbNet weight: About 0.12kg

If you are worried about your car g damaged by someone else after parking, you can use our buline to connect the to ensure that the works 24 hours.If someone else hurts your car and the shotriers the G-r, the will immediately turn on and record the situation.

How to The Parking Cable?

1.Connect with Cae ACC power,when start car engine, will turn on automatically,when turn off car engine, will turn off automatically.2.Connect with Car battery or often electricity,can support 24 hours power for work,sipport car is Parking Monitor function.

Low-voltage protection: This is the protection when the normal power (battery) is connected, that is, when the input voltage is lower than 11.6, the main board will automatically power off and will not continue to consume the battery's power, So as to ensure that the car can normally ignite and start the car.

Use voltage drop line installation, does not occupy arette , arette

for mobile phone charging, saving space

Step-down function:It can convert the voltage of 12-30V into the output voltage of 5V. The

input voltage of electronic products such as cardriving and are all 5V

Multe Security Protection

With low voltage protection, our hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.6V (it depending on your vehicle). More security protection like over-current, short-circuit, re connection, and overheat.

4 DUAL-SLOT fuse holder

4 DUAL-SLOT fuse holder, Standard ATO, mini, low profile mini and micro2. 4 types, suit for most cars on the market

Fuse adapter installation

Fuse Adapter

1. Pull out the orginal fuse at fuse box

2. Insert the orginal fuse to LOWERslot on the adapter

3. Insert fuse to the UPPER slot

4. Insert the adapter to the fuse slot at fuse box

Wire Connection

If you just want the car key to turn the dash cam on or off, please follow these step

1. Red wire connect car key power ACC+12V

2.Yellow wire connect with car key power ACC+12V

3.Blawire connect with GND

If you want 24h parking monitor function:

1. Red wire connect car key power ACC+12V

2.Yellow wire connect with 12V (B+) (not controlled by the ignition key, when your car does not start, it is still energized, it can be d with an electric pen)

3.Blawire connect with GND