For AEM 50-1000 50-1210 340LPH High Flow Intank EFI w/ Siner & Install Kit For Walbro GSS342 W/for AEM Stickers

AEM’s 340LPH High Flow In-Tank is designed for high performance naturally arated and forced induction EFI vehicles. It delivers reliable performance and a high volume of flow for a very competitive price.

The AE40LPH High Flow In-Tank (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. preure graphs on the specs tab for more information.

This is designed for in-tank mounting for use with oline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harne, pre filter, internal hose and clamps, end cap and rubber er sleeve. Every is d to flow 340 lph at 40 PSI before it is packaged for .

Designed for high output naturally arated and forced induction EFI vehicles

In tank design

d to flow 340 lph @ 40 PSI

39mm diameter fits most applications

Offset inlet design eases installation

Each individually d

For oline vehicles

SPECIFICATIONS :

TECHNICAL SPECS:

Weight: 12.5oz (354grams)

Outside Diameter: 39mm OD

External Materials: Blaplated steel with laser etching

Inlet Fitting: 7.7mm ID, 11.0mm OD. Offset Inline

Outlet Fitting: 8 mm hose clamp. Offset

PRV Activation: 80 PSI

Imr Design: Single Scroll Ceramic Turbine

VOLTAGE SPECS:

Connector Terminal: 6 mm Spade (pos/neg)

Min Voltage Input: 6 volts

Max Voltage Input: 18 volts

Current Draw (40 psi): 12 amps (13.5v)

Current Draw (80 psi): 15 amps (13.5v)

Fuse: 20 amps (13.5v)

* Power rating given at 43 PSI, 13.5v at the terminal with a Bof .5. Flow capability for horsepower support is ultimately dependent on hose diameter, and system electrical voltage and amperage capabilities.