for 70mai Rear Cam for 70mai 4K Dash Cam A800s 70mai A800S 4K Car Rearview cam A800 A800S 70mia Dash Cam Pro Plus+ A500S, RC

for 70mai Rear Cam for 70mai 4K Dash Cam A800s 70mai A800S 4K Car Rearview cam A800 A800S 70mia Dash Cam Pro Plus+ A500S, RC06 for A800S, A500S

Note:

for 70mai Rear Cam RC06 can only used for 70mai Dash Cam A800, A800S, A500S(not for A500)

An optional CPL(Cirular polarizing )can be used to reduce

reflections and glare that might otherwise foul up your image quality.(OPtional)

(Note: Rear Cam HDMI cable length: 5.5M)

Specification:Material: ABSOutput voltage: 5VOutput current: 1A/1.5A/2.5AStandby power consumption: ≤ 0.01WLow Voltage Protection: 11.6VOutput interface: Mini usbNet weight: About 0.12kg

If you are worried about your car g damaged by someone else after parking, you can use our buline to connect the to ensure that the works 24 hours.If someone else hurts your car and the shotriers the G-r, the will immediately turn on and record the situation.

BuLine

Use the buline to not occupy the arette interface.First, connect the negative pole(blaline) of the buline to the ground of the car fuse box;Secondly, if you want to continue monitoring after parking (the works 24 hours), connect the positive pole(red line) of the buline to the BAT interface of the car fuse box;If you want to stop monitoring after parking (the does not work after parking), connect the positive pole of the buline to the fuse box ACC interface.

How to The Parking Cable?

1.Connect with Cae ACC power,when start car engine, will turn on automatically,when turn off car engine, will turn off automatically.2.Connect with Car battery or often electricity,can support 24 hours power for work,sipport car is Parking Monitor function.

Use voltage drop line installation, does not occupy arette , arette

for mobile phone charging, saving space

Low-voltage protection: This is the protection whenthe normal power (battery) is connected, that is, whenthe input voltage is lower than 11.6, the main boardwill automatically power off and will not continue toconsume the battery's power, So as to ensure that thecar can normally ignite and start the car.

Step-down function:It can convert the voltage of 12-30V into the output voltage of 5V. The

input voltage of electronic products such as cardriving and are all 5V