for 70mai Hardwire Kit Parking Cable ONLY for 70mai Dash Cam M500 24H Parking Monitor Power Line

for 70mai Hardwire Kit Parking Cable ONLY for 70mai Dash Cam M500 24H Parking Monitor Power Line

Input:12V-24V; Output:5V/3A, hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped TYPEC USB conversion cable,works for almost all car

Multe Security Protection

With low voltage protection, our hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.6V (it depending on your vehicle). More security protection like over-current, short-circuit, re connection, and overheat.

4 DUAL-SLOT fuse holder

4 DUAL-SLOT fuse holder, Standard ATO, mini, low profile mini and micro2. 4 types, suit for most cars on the market

Fuse adapter installation

Fuse Adapter1. Pull out the orginal fuse at fuse box2. Insert the orginal fuse to LOWERslot on the adapter3. Insert fuse to the UPPER slot4. Insert the adapter to the fuse slot at fuse box

Wire Connection

If you just want the car key to turn the dash cam on or off, please follow these steps1. Red wire connect car key power ACC+12V2.Yellow wire connect with car key power ACC+12V3.Blawire connect with GNDIf you want 24h parking monitor function:1. Red wire connect car key power ACC+12V2.Yellow wire connect with 12V (B+) (not controlled by the ignition key, when your car does not start, it is still energized, it can be d with an electric pen)3.Blawire connect with GND