FNIRSI-1013D Digital Tablet Oscilloscope Dual 100M Bandwidth 1GS Sample Rate Capacitive Touch Screen + Gestures

The FNIRSI 1013D is a full-featured, practical, cost-effective dual- flat oscilloscope for maintenance and R&D.Note: After the product is produced, we will make multiple measurements to ensure the quty of the product. If you encounter any probl in use, please contact us, we will contact the technician as soon as poible to answer for you.

Attack:

Intelligent anti-, 1X can withstand voltage up to 400V.100MHz analog bandwidth @1GSa/s sampling rate (1X=5MHz, 10X=100MHz).Fully suitable for 7 inch 800*480 resolution color TFT LCD display, bright color and high contrast.Capacitive touch screen, the same way as modern mobile phone tablets, is not an ancient nail-operated resistive touch screen.The measurement voltage range is high, 1X can measure 0~40V, 10X can measure 0~400V, 100X can measure 0~4000V.Up to 12 measurements: VPP, VP, Vmax, Vmin, Vavg, Vrms, frequency, working +, working +, time+, time, cycle.Cursor measurement function for manual measurement of cycles and frequency and voltage.Full trigger function (single, normal, automatic).At any time, the waveform display (pause function) is frozen.Equipped with efficient one-touch automatic.One-click waveform storage and screenshots.Built-in 1GB storage space, up to 1000 screenshots + 1000 sets of waveform data.The powerful waveform image manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion, and waveform zooming, zooming out, moving, etc.Equipped with USB interface, you can connect to a computer to share screenshots with the computer to facilitate secondary analysis.The Lizaru graphical display function can be used to determine the amplitude, frequency, and phase difference of two sets of signals.The FFT display function can analyze the spectral characteristics of the signal.Built-in 6000mAh rechargeable lithium battery, full charge at the highest screen brightne for 4 hours of continuous use.Memory compreion technology, waveform refresh screen does not flicker.Screen brightne adjustment.Background grid brightne adjustment.Ultra-thin and easy to carry.

Specification:

Material: ABSColor: Black + WhiteAnalog bandwidth: 100MHz*2Number of s: 2 sMaximum real-time sampling rate: 1GSa/sVertical sensitivity: mV/div ~ 0V/divHorizontal time base range: S/div ~ 10nS/divMaximum test voltage: 40V (1X probe), 400V (10X probe)Storage depth: 240KbitInput resistance: 1MAnalog-to-digital converter accuracy: 8 bitsCoupling mode: AC/DCTrigger mode: single trigger, normal trigger, automaticTrigger edge: rising edge/falling edgeExternal trigger voltage: 0~40VDisplay: 7 inch - 800*480Operation: capacitive touch screen + gesturesExpansion port: USB picture exportPower supply: 1*lithium battery, 6000mAh (included)Item size: 184*124*mm/7.2*4.9*2.0 inchesPacking size: 200*134*60mm/7.9*5.3*2.4inPackage weight: 986 g / 2.2 lb

Packing List:

1*FNIRSI 1013D oscilloscope host2 * Matched 100MHz probes (1X and 10X)1 * USB cable1 * Charging adapter