FC-280SC-18180 Door lowith adjusting motor 0.08A Reversal For Toyota Sienna Mini Cargo Van Nissan Juke F15 MK1 12V DC DIY

FC-280SC-18180 Door lowith adjusting motor 0.08A Reversal For Toyota Sienna Mini Cargo Van Nian Juke F15 MK1 12V DC DIY

For 2004-2010 Toyota Sienna Mini Cargo Van

For 2011-2017 Nian Juke F15 MK1

OE number:

Toyota Sienna：Rear left：8562008071；8562008070；15092175；8562008060；8562008061

Product information:

1. Shell: FC280;

2. Total shaft length: 45 mm;

3. Turning: reversal;

4. Speed: About 12000 rpm;

5.voltage 12V; current 0.08A

Advantage:

1. motor

2.Pure copper brush

3.High speed operation

4.Motor housing material: Aluminum alloy

5.Rear cover material：rigid plastics

6.Worm material: copper

7.Internal material: Pure copper

8.Internal carbon brush material: high copper

9.Easy to install

10.Packing bag：Solid, waterproof, Private label, airtight

Tips

If the steering is not the direction you want,just exchange the welding area of the power supply line.

Car door lomotor Product Description:

Why need Change motor?

1. After locking car by e control, the door won't loproperly, because the motor has gone bad, it has stopped working.

2. when the car door losometimes work , sometimes get stuck, or e control can sometimes open, sometimes fixed card in the Middle,then pre the e control several times to open; ageing motor, motor torque has become smaller, motor power is not lopieces of gear.

3. when driving in the car, after the door lock, door locks has problem that door can be opened.

Profeional ace:

1. door loAembly easy to repair it? Locked inside the motor can change?

Locking bloAembies are fixed by screws, so they can be easily opened using a screwdriver, rep the motor is also very convenient, put it batogether again is also easy.

2. rep motor or directly changed the locks bloAembly which is better?

4S shop for locking bloAembly parts to more than $150, and a motor le tahn $15, a difference of more than 10 times. Known, locked inside metal and plastic parts ' life-or at least more than 20 years, so after changing the motor, you get a set of locking bloAembly,renewed motor like changing batteries, because the carbon brushes of the motor service life has exed. Symptoms,when the car door can sometimes lock, sometimes won't lock, sometimes open and sometimes will notopen, motor age,motor carbon brush wear is too large, motor torque has become smaller, motor power is still locked inside the spring. After the emotpe-controlled loandthen unlock, problematic loblocks, can't open the door from the outside, it can be opened from the inside,left key can open the front door. And in the case of not locking the car, can play both inside and outside the door, again after locking the car, still same problem, which can open the door, but couldn't open the door.