Factory G125 Antique Lamp Bulb Retro Vintage Decorative Tungsten Bulb

Main Products: Incandescent Lamp, Halogen Light Fixtures, Carbon Lamp, LED Lamp Strip Lights and Other Special Tungsten Wire Light Sources
Products Are Exported to North America, South America, Europe, Asia, Middle East and Other Countries.
Fabrication Order Can Be Completed According to Different Requirements of Customers.
Convenient Transportation Is One of the Municipal Key Export Enterprises.
Some Products Are Supplied in in Stock. If They Are Damaged, They Will Be Reissued for Free. VAT Invoices Can Be Issued.
Tips: Product Pictures, Prices and Attributes Are for Reference Only
For More Information, Call Or Wangwang Online Consultation Shall Prevail. We Sincerely Look Forward to Cooperating with You!

[about Installation]]

All Products in Our Store Are Attached with Installation Instructions in the Packing Box. to Ensure Safety, It Is Recommended to Install Them under the Guidance of Professional Electricians! If You Want to DIY Yourself, You Can Contact Us If You Have Any Questions!

[Precautions for Use]]

1. the Power Supply Should Not Exceed the Specified Range (Rated Voltage Ac220v 10%, Frequency 50Hz). If It Is Used for a Long Time When It Is Higher than the Rated Voltage Range, It May Shorten the Service Life of Lamps Due to Overheating.
2. Do Not Install Lamps in the Open Air to Avoid Leakage and Short Circuit of the Products, Resulting in Adverse Consequences of the Products.
3. Do Not Install Lamps above High Temperature Objects to Avoid Adverse Consequences.
4. before Maintaining, Installing and Replacing the Light Source, Make Sure That the Power Supply Has Been Cut off, and Make Sure That the Light Source Is Correctly Installed above the Lamp Body to Turn on the Power Supply.
5. This Lamp Cannot Be Dimmer for Shashlik to Avoid Failure.
6. under No Circumstances Can Lamps Be Covered by Thermal Insulation Pads Or Similar Materials

[about Maintenance and Maintenance Instructions]]

1. for Safe and Efficient Use of This Product, Please Clean and Check Regularly (Once Every June One).
2. When the Lamp Is Dirty and Needs to Be Scrubbed, Please Wring It out with Soft Fabric and Soap Water and Wipe the Outer Surface of the Lamp. the Reflective Plating Film Can Only Be Tested with Soft Dry Cloth.
3. Please Do Not Wipe with Thinner Chemicals and Pesticides Such as Highly Volatile, Alcohol, Gasoline, Etc.; Otherwise, the Reflective Layer in the Chassis Will Be Damaged Or Discolored, Resulting in Discoloration and Damage of Lamps.

...................................................................................................................................................................................................................................................................................................................................... 

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.