EVKEY Car Head Up Display meter RPM Mirror For Tesla Model 3 Y 2019~HUD Dial Alarm Set MPH KMH

Special Features:

1.Special designing HUD for Tesla Model 3,Model Yar 2018 year 2.More than 16 kinds of data can display, like Over-speed, Lower Voltage, Handbrake , Safty belt, Auto brake Alarm Light etc 3.Exchangeable Speed unite MPH /KMH 4.it can support project on mirror screen clearly 5.Easy Installation via hand

HUD display functions:

1.Fog light 2. Brake warning light 3. Seat belt indicator 4.Real Time 5. Width indicator light 6.High beam light 7. Low beam light 8. Door indicator 9.turn signal light 10. Gear position display 11 Parking light 12. Vehicle speed display 13. Right turn signal 14. Vehicle speed unit 15. Remaining battery percentage 16. Energy progre bar

Language Set:Please choose your familiarguage(CN-SimplifiedChinese/TW-ditional Chinese/ EN-English) Sound Switch:turn on/off the Speed Alarm:the default value is 150 (the default value can be changed,pull downis to decrease,pull upis to increase, adjust range is 5-200km/h) Change Color 1:thespeed color in the main display interface (8 colors available) Change Color 2:the left side functions color on the screen(8 colors available) Change Color 3:the right side functions color on the screen(8 colors available) Brightne:default 0(Automatic sensitivity),1-8(the brightne will be increased as the dial added) Time adjust:Adjust according to your local time zone Factory set:the system is restored to the factory preset value. Ar selecting this operation, pre the dial to confirm System ( Version only) The HUD and the smart phone are connected wirelely via Bluetooth, and the information is displayed synchronously through the APP. The following conditions must be met to achieve the smartphone system supported by this function: Android 4.0, IOShone5 or higher) Android phones, please search on the Android market: WiiYii hone Search on APP Store:WiiYii

Note:

1.Please download this ,install HUD and actuate your car,manually turn on the Bluetooth and positioned,he icon of WiiYii,system will automatically search the Bluetooth and connect 2. If the mobile phone cannot connect to the Bluetooth device correctly, please follow the instructions below: HUD needs to be displayed normally. If the system cannot be connected, please switch to the normal display of the system. Whether the mobile phone Bluetooth is connected to other devices, Delete the paired Bluetooth device, and bind WYHUD 3. Turn off the Bluetooth and on again, or restart the phone (For more questions, please refer to the FAQ on the page)

FAQ

1.How to install APP (1) Scan the QR code with your mobile phone (see the QR code in the instruction manual), and open it in your browser as prompted. download and complete the installation. hone App Store Search WiiYii Android Phone Search WiiYii on Android Market (2)Ar the APP is properly installed, the mobile phone turns on Bluetooth, location services,ffic,and clicks the WiiiYii icon, the system will automatically search for Bluetooth devices and connect 2.Bluetooth cannot connect to Phone (1)HUD needs to be displayed normally. If the system cannot be connected, please switch to the mode. (2)Whether the mobile phone Bluetooth is connected to other devices, delete the paired Bluetooth device, and then bind WYHUD (3)Turn Bluetooth off and on again on your phone, or restart your phone 3.APP Bluetooth connection is not succeful (1 ) Chethe phone system version and whether it supports Bluetooth 4.0, system IO or above, Android 4.4 or above (2)Need mobile phone to search for WYHUD via Bluetooth,Open ffic (3) Turn on positioning, you can enter the ae ar succeful positioning 4.App Bluetooth connection is succeful,no display of input ae Please turn on the location service,open your network,chethe signal,please move to a p which has a strong signal,and enter the ae again 5.HUD studuring ,speed display is normal Turn off the power-saving mode of the phone, turn off the screen forbidden function, or enter the phone page and stay on the phone page 6.HUD stuckwhen you switch the display interface or the screen goes off , speed display is normal Turn off the power saving mode of the mobile phone, turn off the function of disabling the operation of the screen, or enter the mobile page and stay on the mobile page 7.10-20m from the indication point Because the positioning error is about 5-10 meters, it is normal for the signal to be 10-20 meters when the signal is weak.

Package Includes:

1X 1X manual 1X non-sl mat 1X data cable 1X small we 1X crowbar