EV1527 8 Channels 433M Multifunctional Wireless Controller Kit 4 Modes 433M Wireless Control Board DC 1-110V/5A AC 85-265V/6A

Specification:

Dimensions: 99 x 62 x 20 mm

e control type: Compatible

Working voltage: DC 5V/12V/24V

Relay maximum load capacity: DC 1-110V/5A; AC 85-265V/6A

Decoding type: fixed code, can be adapted to up to 32 e controls

Input control pin 8, 5V TTL level, NPN trigger, 0.2-2 seconds low pulse

EV1527 6 Working distance: 100 meters (wirele receiving sensitivity: -108dbm)

Low pulse trigger (connect to power GND through trigger on or control low level through MCU IO port)

8-channel multi-function 433M wirele controller, each channel triggers independent delay independently without interfering with each other

4 Function modes: non-latching (instantaneous); delay (2/10/60/600/3600 seconds); self-locking (switching); interlocking (Latch), the function mode and delay time are selected by the pad.

Working current (DC 12V): Standby current 11MA, 1 relay on 37MA, 2 relays on 64MA, 3 relays on 88MA, 4 relays on 110MA, 5 relays on 131MA, 6 relays on 151MA, 7 relays on Open 170MA, 8 relays open 187MA

Adapter e Control (Learning e Control):

In normal working mode, the LED is always on, and when a valid e control key value is received, the LED flashes.

Clear code: long pre the on, the LED goes out. After about 5 seconds, the LED will be on, and the code clearing is completed (Note: After the code clearing is executed, the previously saved e control does not exist, if you need to use the old e control, please re-learn).

Adaptation (learning):

The first step (matching the e control): Pre any key on the e control, if the LED light flashes quickly, it means it is a matching e control, otherwise it is not a matching e control.

Step 2 (enter learning mode): touch the on, the LED light goes out.

Step 3 (Learning the e control): Pre any key on the e control within 10 seconds, the LED light flashes 3 times and then lights up, the learning is succeful; if the LED light only flashes twice, the learning fails, indicating that the learning has been completed, through the e control; learning Finish.

Note: Please use the e control we sell, otherwise it may not be compatible with the e control.

433M 8-on EV1527 e control:

Data rate: 50~60KHZ

Working current: ≤18mA

Transmit power: 15 mW

Oscillation resistance: 270K

Modulation method: ASK OOK

Operating frequency: 433.92MHz

Frequency deviation: ±0.2MHz

Oscillation method: SAW resonator

Encoding format: million group code (EV1527)

Power supply: 12V 23A battery can be replaced (delivery without battery)

Shping list:

1*Module

1*e control

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.