Ethernet Converters RS232 DB9 Pin RS485 RS422 Available

Auto-MDI/MDIX, RJ45 port with 10/100Mbps. Work mode: Server, Client, UDP Client, UDP Server, HTTPD Client
Baud rate of serial port can be configured from 600 to 230.4 Kbps, supports check bit of none, odd, even, mark and space package mechanism to connection is reliable, put an end to dead link. User-defined registration package mechanism, check connection status and as custom packet header
Supports RS232/RS485/RS422 port ( Can't be used at one time)
Under Server Mode, the connection number with client can be randomly set from 1 to 16, default number is 4. IP has been connected can be shown according to connectiong with calculating send / recceive dat. Plug Type:EU Plug,it applies to Indonesia, Germany, , Spain, and so on
Voltage: AC220V
When connection number reaches a maximun, the new connection is kicked off the old one can be configured by user
Parameters can be configured by -in webpage, AT , serial port procotol and network procotol. Setting procotol is avaliable to integrate into user's software.
Supports client short connection function, user-defined the disconnected time.
Device restart if no data transmission or timeout. User-defined the restart time.
If data buffer needs to clear configuration before connection establishment
Supports DHCP, automatically obtain an IP address and query IP address via serial setting protocol.
The global unique address, user-defined address
DNS function
DNS server addres can be defined
Firmware can be upgraded by network Virtual com software
Restore factory setting through software or hardware
Running across the , switches or routers.
Can work in LAN, also can work in the Internet
material: plastic
Color as shown

Package Contents:
1 x Ethernet RS232 Converters
1 x adapter Only the above package content, other products are not included.
Note: Light reflection and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.